Subsurface oxygen maxima (SOM) are recurrent but poorly understood features within the eastern tropical North Pacific oxygen deficient zone (ODZ). Here, we analyze a subsurface oxygen maximum (SOM) observed during the SR2114 cruise using in situ biogeochemical and physical measurements, satellite remote sensing, and Lagrangian particle tracking. The SOM was detected around the 26.4 isopycnal (~150–200 m) and spatially associated with elevated oxygen concentrations within an otherwise hypoxic environment. Our results show that intense gap winds in the Gulfs of Tehuantepec and Papagayo generate strong upwelling, vertical mixing, and horizontal advection near the coast, potentially allowing subsurface layers to come into contact with surface waters and become oxygenated. The observed vertical penetration of wind-driven features below the Ekman layer also suggests the influence of eddy-wind interactions that reinforce vertical coherence and enhance the offshore transport of oxygen-rich waters. The offshoreward jets observed down to the SOM layer depth highlight the contribution of such coupled processes to ventilating the ODZ interior. Furthermore, float-based observations along isopycnals indicate progressive oxygen loss over time, likely due to local respiration, pointing to dynamic interplay between physical supply and biogeochemical consumption. Together, these findings underscore the pivotal role of coastal wind forcing and mesoscale dynamics in shaping the subsurface oxygen landscape of the eastern tropical North Pacific. The Lagrangian analysis also highlights distinct pathways for water parcels within the ODZ: south of 14°N, water masses are primarily influenced by equatorial currents, whereas in the northern region, water parcels predominantly originate from coastal sources with extended residency times.

Compact autonomous marine vehicles, both surface and submersible, are now commonly used to conduct observations of ocean velocities using Acoustic Doppler Current Profilers (ADCPs). However, in the inevitable presence of surface waves, ADCP measurements conducted by these platforms are susceptible to biases stemming from wave-coherent orbital motion and platform tilting. In typical ocean conditions, the magnitude of the bias can reach tens of centimeters per second. This paper presents analytical derivation of the depth-dependent bias formulas in the small-amplitude linear wave approximation. A variety of scenarios are considered, encompassing surface and subsurface platforms, upward- and downward-looking ADCPs, free-drifting and self-propelled vehicles. The bias is shown to be a function of the wave field properties, platform response dynamics, and the ADCP configuration (particularly, orientation and beam angle). In all cases, the wave-induced biases show parametric scaling similar to that of the Stokes drift, albeit with a number of critical nuances. Analytical derivations are validated with a semi-analytical model, which can also be used to estimate the biases for more complex measurement configurations and fully nonlinear waves. Further analysis reveals unexpected fundamental differences between the upward- and downward-looking ADCP configurations, offering insights for experimental design aimed at minimizing and mitigating wave-induced biases in autonomous oceanographic observations.

The Sub-Mesoscale Ocean Dynamics Experiment (S-MODE) is a NASA Earth Ventures Suborbital investigation designed to test the hypothesis that oceanic frontogenesis and the kilometer-scale ("submesoscale") instabilities that accompany it make important contributions to vertical exchange of climate and biological variables in the upper ocean. These processes have been difficult to resolve in observations, making model validation challenging. A necessary step toward testing the hypothesis was to make accurate measurements of upper-ocean velocity fields over a broad range of scales and to relate them to the observed variability of vertical transport and surface forcing. A further goal was to examine the relationship between surface velocity, temperature, and chlorophyll measured by remote sensing and their depth-dependent distributions, within and beneath the surface boundary layer. To achieve these goals, we used aircraft-based remote sensing, satellite remote sensing, ships, drifter deployments, and a fleet of autonomous vehicles. The observational component of S-MODE consisted of three campaigns, all conducted in the Pacific Ocean approximately 100-km west of San Francisco during 2021–23 fall and spring. S-MODE was enabled by recent developments in remote sensing technology that allowed operational airborne observation of ocean surface velocity fields and by advances in autonomous instrumentation that allowed coordinated sampling with dozens of uncrewed vehicles at sea. The coordinated use of remote sensing measurements from three aircraft with arrays of remotely operated vehicles and other in situ measurements is a major novelty of S-MODE. All S-MODE data are freely available, and their use is encouraged.

The expansion of autonomous observation platforms offers vast opportunities for analyzing ocean ecosystems and their role in carbon export. As part of the EXport Processes in the Ocean from RemoTe Sensing campaign, we autonomously measured the productivity regimes in two contrasting end-member ecosystem states. The first campaign occurred in the subpolar North Pacific near Ocean Station Papa (Site 1), characterized by iron limitation and a highly regenerative regime. The second captured a springtime bloom in the North Atlantic (Site 2), which typically drives efficient export of productivity. Using a combination of floats and gliders carrying biogeochemical sensors, we quantified gross primary productivity, net community production, and organic carbon export potential (fC_org) to assess biological carbon pump strength. Site 2 demonstrated higher cruise-period productivity, with roughly 5x the gross primary productivity and 13x the euphotic zone net community production seen at Site 1. Greater export efficiency at Site 2 was reflected in numerous indices, such as the ratio of new production to net primary productivity (ef-ratio; Site 1: 0.33; Site 2: 0.73), the ratio of sinking particulate organic carbon to net primary productivity (ez-ratio; Site 1: 0.24; Site 2: 0.69), and mean daily fCorg (Site 1: 3.4 ± 0.7; Site 2: 20.3 ± 2.3 mmol C m^-2 d^-1). Together with particulate organic carbon flux derived from thorium-234 measurements, we infer that observed low net community production was almost entirely routed to sinking particulate organic carbon at Site 1, while the much higher net community production at Site 2 resulted in near-equal proportions routed to dissolved organic carbon production and sinking particulate organic carbon.

Submesoscale eddies (those smaller than 50 km) are ubiquitous throughout the ocean, as revealed by satellite infrared images. Diagnosing their impact on ocean energetics from observations remains a challenge. This study analyzes a turbulent field of submesoscale eddies using airborne observations of surface currents and sea surface temperature, with high spatial resolution, collected during the S-MODE experiment in October 2022. Assuming surface current divergence and temperature are homogeneous down to 30 m depth, we show that more than 80% of the upward vertical heat fluxes, reaching ~227 W m^-2 , is explained by the smallest resolved eddies, with a size smaller than 15 km. This result emphasizes the contribution of small-scale eddies, poorly represented in numerical models, to the ocean heat budget and, therefore, to the climate system.

Ocean images collected by astronauts onboard the Apollo spacecraft more than 50 years ago revealed a large number of ocean eddies, with a size between 1 and 20 km. Since then, satellite infrared, ocean color, sun glitter and synthetic aperture radar images, with high spatial resolution, have confirmed the ubiquitous presence of these small eddies in all oceans. However, observing the dynamical characteristics and evolution of these eddies has remained challenging. An experiment was recently carried out in the California Current system using the new airborne Doppler Scatterometer (National Aeronautics and Space Administration–Jet Propulsion Laboratory DopplerScatt) instrument that observes surface velocities. Here, with DopplerScatt, we mapped a 30 x 100 km domain over multiple days to unveil numerous 1–20 km ocean eddies, called submesoscale eddies, that evolve over a period of a few hours. The strong interactions between eddies generate horizontal velocity divergence, implying vertical velocities reaching 250 m day^-1 at 40 m depth. The velocity field also produces horizontal dispersion of particles over a distance of 50 km within 12 h, which rapidly fills the turbulent eddy field. These observations suggest that submesoscale ocean turbulence may profoundly affect the vertical transport of heat, carbon, and important climatic gases between the atmosphere and the ocean interior, as well as the horizontal dispersion of tracers and particles. As such, submesoscale ocean eddies are a critical element of Earth'’s climate system.

Surface drifters (SWIFTs) equipped with down-looking high-resolution acoustic doppler current profilers (ADCPs) were used to estimate the turbulent kinetic energy (TKE) dissipation rate
(ε) within highly stratified diurnal warm layers (DWLs) in the Southern California Bight. Over a 10-day period, five instances of DWLs were observed with strong surface temperature anomalies up to 3°C and velocity anomalies up to 0.3 m s^-1. Profiles of
ε in the upper 5 m suggest turbulence is strongly modulated by the DWL stratification. Burst-averaged (8.5 min) ε is stronger than predicted by law-of-the-wall boundary layer scaling within the DWLs and suppressed below. Predictions for ε within the DWLs are improved by a shear-production scaling using observed shear and linearly decaying turbulent stress. However, ε is still under-predicted. Examination of the un-averaged acoustic backscatter data suggests elevated ε is related to the presence of turbulent structures in the DWLs which span the layer height and strongly modulate TKE. Evolution in the bulk Richardson number each day suggests the DWLs become unstable to layer-scale overturning and entrainment each afternoon, thus the turbulent structures may result from shear-driven instability. This interpretation is supported by a conditional average of the data during a burst characterized by strongly periodic structures. The structures resemble high-frequency internal waves with strong asymmetry in the along-flow direction (steepening) which suggests they are unstable. Coincident asymmetric patterns in upwelling/downwelling and corresponding regions of strong vertical convergence/divergence suggest that both vertical transport and local TKE generation are plausible sources of elevated ε in the DWLs.

Surface drifters (SWIFTs) equipped with down-looking high-resolution acoustic doppler current profilers (ADCPs) were used to estimate the turbulent kinetic energy (TKE) dissipation rate (ε) within highly stratified diurnal warm layers (DWLs) in the Southern California Bight. Over a 10-day period, five instances of DWLs were observed with strong surface temperature anomalies up to 3°C and velocity anomalies up to 0.3 m s^-1. Profiles of ε in the upper 5 m suggest turbulence is strongly modulated by the DWL stratification. Burst-averaged (8.5 min) ε is stronger than predicted by law-of-the-wall boundary layer scaling within the DWLs and suppressed below. Predictions for ε within the DWLs are improved by a shear-production scaling using observed shear and linearly decaying turbulent stress. However, ε is still under-predicted. Examination of the un-averaged acoustic backscatter data suggests elevated ε is related to the presence of turbulent structures in the DWLs which span the layer height and strongly modulate TKE. Evolution in the bulk Richardson number each day suggests the DWLs become unstable to layer-scale overturning and entrainment each afternoon, thus the turbulent structures may result from shear-driven instability. This interpretation is supported by a conditional average of the data during a burst characterized by strongly periodic structures. The structures resemble high-frequency internal waves with strong asymmetry in the along-flow direction (steepening) which suggests they are unstable. Coincident asymmetric patterns in upwelling/downwelling and corresponding regions of strong vertical convergence/divergence suggest that both vertical transport and local TKE generation are plausible sources of elevated ε in the DWLs.

A neutrally buoyant float deployed in an atmospherically driven turbulent ocean boundary layer on the dense side of a submesoscale front was repeatedly carried across the boundary layer by the turbulence and then trapped beneath the slumping front. Lagrangian particles in a large-eddy simulation of a similar baroclinically unstable front forced by surface cooling move along convergent surface filaments toward filament junctions. They are also caught by convective plumes that downwell them at speeds similar to those of the float. Subsequently, some are trapped in the pycnocline by frontal slumping due to ageostrophic secondary frontal circulations. In both observations and simulations, boundary layer turbulence and frontal circulations work together to trap and subduct particles from the mixed layer. The small-scale boundary layer motions move them vertically within the boundary layer and larger, submesoscale frontal circulations move them laterally out of the boundary layer and under the slumping fronts.

We study the near-inertial response of the salinity-stratified north Bay of Bengal to monsoonal wind forcing using 6 years of hourly observations from four moorings. The mean annual energy input from surface winds to near-inertial mixed layer currents is 10–20 kJ m^-2, occurring mainly in distinct synoptic "events" from April–September. A total of fifteen events are analyzed: Seven when the ocean is capped by a thin layer of low-salinity river water (fresh) and eight when it is not (salty). The average near-inertial energy input from winds is 40% higher in the fresh cases than in the salty cases. During the fresh events, 1) mixed layer near-inertial motions decay about two times faster and 2) near-inertial kinetic energy below the mixed layer is reduced by at least a factor of three relative to the salty cases. The near-inertial horizontal wavelength was measured for one fresh and one salty event; the fresh was about three times shorter initially. A linear model of near-inertial wave propagation tuned to these data reproduces 2); the thin (10 m) mixed layers during the fresh events excite high modes, which propagate more slowly than the low modes excited by the thicker (40 m) mixed layers in the salty events. The model does not reproduce 1); the rapid decay of the mixed layer inertial motions in the fresh events is not explained by the linear wave propagation at the resolved scales; a different and currently unknown set of processes is likely responsible.

Two moorings deployed for 75 days in 2019 and long-term satellite altimetry data reveal a spatially complex and temporally variable internal tidal field at the Surface Water and Ocean Topography (SWOT) Cal/Val site off central California due to the interference of multiple seasonally-variable sources. These two data sets offer complementary insights into the variability of internal tides in various time scales. The in situ measurements capture variations occurring from days to months, revealing ~45% coherent tides. The north mooring displays stronger mode-1 M₂ with an amplitude of ~5.1 mm and exhibits distinct time-varying energy and modal partitioning compared to the south mooring, which is only 30-km away. The 27-year altimetry data unveils the mean and seasonal variations of internal tides. The results indicate that the complex internal tidal field is attributed to multiple sources and seasonality. Mode-1 tides primarily originate from the Mendocino Ridge and the 36.5–37.5°N California continental slope, while mode-2 tides are generated by local seamounts and Monterey Bay. Seasonality is evident for mode-1 waves from three directions. The highest variability of energy flux is found in the westward waves (±22%), while the lowest is in the southward waves (±13%). The large variability observed from the moorings cannot be solely explained by seasonality; additional factors like mesoscale eddies also play a role. This study emphasizes the importance of incorporating the seasonality and spatial variability of internal tides for the SWOT internal tidal correction, particularly in regions characterized by multiple tidal sources.

Subtropical oceans contribute significantly to global primary production, but the fate of the picophytoplankton that dominate in these low-nutrient regions is poorly understood. Working in the subtropical Mediterranean, we demonstrate that subduction of water at ocean fronts generates 3D intrusions with uncharacteristically high carbon, chlorophyll, and oxygen that extend below the sunlit photic zone into the dark ocean. These contain fresh picophytoplankton assemblages that resemble the photic-zone regions where the water originated. Intrusions propagate depth-dependent seasonal variations in microbial assemblages into the ocean interior. Strikingly, the intrusions included dominant biomass contributions from nonphotosynthetic bacteria and enrichment of enigmatic heterotrophic bacterial lineages. Thus, the intrusions not only deliver material that differs in composition and nutritional character from sinking detrital particles, but also drive shifts in bacterial community composition, organic matter processing, and interactions between surface and deep communities. Modeling efforts paired with global observations demonstrate that subduction can flux similar magnitudes of particulate organic carbon as sinking export, but is not accounted for in current export estimates and carbon cycle models. Intrusions formed by subduction are a particularly important mechanism for enhancing connectivity between surface and upper mesopelagic ecosystems in stratified subtropical ocean environments that are expanding due to the warming climate.

Mixing of the ocean beneath tropical cyclones (TC) cools the surface temperature thereby modifying the storm intensity. Modeling studies predict that surface wave forcing through Langmuir turbulence (LT) increases the mixing and cooling and decreases near-surface vertical velocity shear. However, there are very few quantitative observational validations of these model predictions, and the validation efforts are often limited by uncertainties in the drag coefficient (C_d). We combine EM-APEX and Lagrangian float measurements of temperature, salinity, velocity, and vertical turbulent kinetic energy (VKE) from five TCs with a coupled ocean–wave model (Modular Ocean Model 6 — WAVEWATCH III) forced by the drag coefficient C_d directly constrained for these storms. On the right-hand of the storms in the northern hemisphere, where wind and waves are nearly aligned, the measured VKE is consistent with predictions of models including LT and 2–3 times higher than predictions without LT. Similarly, vertical shear in the upper 20 m is small, consistent with predictions of LT models and inconsistent with the large shears predicted by models without LT. On the left-hand of the storms, where wind and waves are misaligned, the observed VKE and cooling are reduced compared to those on the right-hand, consistent with the measured decrease in C_d. These results confirm the importance of surface waves for ocean cooling and thus TC intensity, through both C_d and LT effects. However, the model predictions, even with the LT parameterization, underestimate the upper ocean cooling and mixed layer deepening by 20%–30%, suggesting possible deficiency of the existing LT parameterization.

Mesoscale eddies are a dominant source of spatial variability in the surface ocean and play a major role in the biological marine carbon cycle. Satellite altimetry is often used to locate and track eddies, but this approach is rarely validated against in situ observations. Here we compare measurements of a small (under 25 km radius) mode water anticyclonic eddy over the Porcupine Abyssal Plain in the northeastern Atlantic Ocean using CTD and Acoustic Doppler Current Profiler (ADCP) measurements from three ships, two gliders, two profiling floats, and one Lagrangian float with those derived from sea level anomaly (SLA). In situ estimates of the eddy center were estimated from maps of the thickness of its central isopycnal layer, from ADCP velocities at a reference depth, and from the trajectory of the Lagrangian float. These were compared to three methods using altimetric SLA: one based on maximizing geostrophic rotation, one based on a constant SLA contour, and one which maximizes geostrophic velocity speed along the eddy boundary. All algorithms were used to select CTD profiles that were within the eddy. The in-situ metrics agreed to 97%. The altimetry metrics showed only a small loss of accuracy, giving >90% agreement with the in situ results. This suggests that current satellite altimetry is adequate for understanding the spatial representation of even relatively small mesoscale eddies.

Rain in tropical cyclones is studied using eight time series of underwater ambient sound at 40 Hz–50 kHz with wind speeds up to 45ms−1 beneath three tropical cyclones. At tropical cyclone wind speeds, rain- and wind-generated sound levels are comparable, so that rain cannot be detected by sound level alone. A rain detection algorithm based on the variations of 5–30 kHz sound levels with periods longer than 20 seconds and shorter than 30 minutes is proposed. Faster fluctuations (<20 s) are primarily due to wave breaking, and slower ones (>30 min) due to overall wind variations. Higher frequency sound (>30 kHz) is strongly attenuated by bubble clouds. This approach is supported by observations that, for wind speeds <40 m s^-1, the variation in sound level is much larger than that expected from observed wind variations, and roughly comparable with that expected from rain variations. The hydrophone results are consistent with rain estimates by the Tropical Rainfall Measuring Mission (TRMM) satellite and with Stepped-Frequency Microwave Radiometer (SFMR) and radar estimates by surveillance flights. The observations indicate that the rain-generated sound fluctuations have broadband acoustic spectra centered around 10 kHz. Acoustically detected rain events usually last for a few minutes. The data used in this study are insufficient to produce useful estimation of rain rate from ambient sound, due to limited quantity and accuracy of the validation data. The frequency dependence of sound variations suggests that quantitative rainfall algorithms from ambient sound may be developed using multiple sound frequencies.

Oxygen Deficient Zones (ODZs) of the world's oceans represent a relatively small fraction of the ocean by volume (<0.05% for suboxic and <5% for hypoxic) yet are receiving increased attention by experimentalists and modelers due to their importance in ocean nutrient cycling and predicted susceptibility to expansion and/or contraction forced by global warming. Conventional methods to study these biogeochemically important regions of the ocean have relied on well-developed but still relatively high cost and labor-intensive shipboard methods that include mass-spectrometric analysis of nitrogen-to-argon ratios (N₂/Ar) and nutrient stoichiometry (relative abundance of nitrate, nitrite, and phosphate). Experimental studies of denitrification rates and processes typically involve either in-situ or in-vitro incubations using isotopically labeled nutrients. Over the last several years we have been developing a Gas Tension Device (GTD) to study ODZ denitrification including deployment in the largest ODZ, the Eastern Tropical North Pacific (ETNP). The GTD measures total dissolved gas pressure from which dissolved N₂ concentration is calculated. Data from two cruises passing through the core of the ETNP near 17°N in late 2020 and 2021 are presented, with additional comparisons at 12°N for GTDs mounted on a rosette/CTD as well as modified profiling Argo-style floats. Gas tension was measured on the float with an accuracy of < 0.1% and relatively low precision (< 0.12%) when shallow (P< 200 dbar) and high precision (< 0.03%) when deep (P > 300 dbar). We discriminate biologically produced N₂ (i.e., denitrification) from N₂ in excess of saturation due to physical processes (e.g., mixing) using a new tracer – 'preformed excess-N₂'. We used inert dissolved argon (Ar) to help test the assumption that preformed excess-N₂ is indeed conservative. We used the shipboard measurements to quantify preformed excess-N₂ by cross-calibrating the gas tension method to the nutrient-deficit method. At 17°N preformed excess-N₂ decreased from approximately 28 to 12 μmol/kg over σ0 = 24–27 kg/m³ with a resulting precision of ±1 μmol N₂/kg; at 12°N values were similar except in the potential density range of 25.7< σ0< 26.3 where they were lower by 1 μmol N₂/kg due likely to being composed of different source waters. We then applied these results to gas tension and O₂ (< 3 μmol O₂/kg) profiles measured by the nearby float to obtain the first autonomous biogenic N₂ profile in the open ocean with an RMSE of ± 0.78 μM N₂, or ± 19%. We also assessed the potential of the method to measure denitrification rates directly from the accumulation of biogenic N₂ during the float drifts between profiling. The results suggest biogenic N₂ rates of ±20 nM N₂/day could be detected over >>16 days (positive rates would indicate denitrification processes whereas negative rates would indicate predominantly dilution by mixing). These new observations demonstrate the potential of the gas tension method to determine biogenic N₂ accurately and precisely in future studies of ODZs.

Due to strong turbulent mixing, the ocean surface boundary layer region is generally not conducive to double diffusion. However, vertical microstructure profiles observations in the northeastern Arabian Sea during May 2019 imply the formation of salt fingers in the diurnal thermocline (DT) region during the daytime. In the DT layer, conditions are favorable for salt fingering: Turner angle values are between 50 and 55° with both temperature and salinity decreasing with depth; shear-driven mixing is weak with a turbulent Reynolds number of about 30. The presence of salt fingering in the DT is confirmed by the presence of staircase-like structures with step sizes larger than the Ozmidov length and by the dissipation ratio that is larger than the mixing coefficient. The unusual daytime salinity maximum in the mixed layer that supports salt fingering is primarily due to a daytime reduction in vertical entrainment of fresh water along with minor contributions from evaporation and horizontal advection and a significant contribution from detrainment processes.

Vertical transport pathways in the ocean are still only partially understood despite their importance for biogeochemical, pollutant, and climate applications. Detailed measurements of a submesoscale frontal jet in the Alboran Sea (Mediterranean Sea) during a period of highly variable winds were made using cross-frontal velocity, density sections and dense arrays of surface drifters deployed across the front. The measurements show divergences as large as ±f implying vertical velocities of order 100 m/day for a ≈ 20 m thick surface layer. Over the 20 hr of measurement, the divergences made nearly one complete oscillation, suggesting an important role for near-inertial oscillations. A wind-forced slab model modified by the observed background frontal structure and with initial conditions matched to the data produces divergence oscillations and pattern compatible with that observed. Significant differences, though, are found in terms of mean divergence, with the data showing a prevalence of negative, convergent values. Despite the limitations in data sampling and model uncertainties, this suggests the contribution of other dynamical processes. Turbulent boundary layer processes are discussed, as a contributor to enhance the observed convergent phase. Water mass properties suggest that symmetric instabilities might also be present but do not play a crucial role, while downward stirring along displaced isopycnals is observed.

Intensive hydrographic and horizontal velocity measurements collected in the Alboran Sea enabled us to diagnose the three-dimensional dynamics of a frontal system. The sampled domain was characterized by a 40 km diameter anticyclonic eddy, with an intense front on its eastern side, separating the Atlantic and Mediterranean waters. Here, we implemented a multi-variate variational analysis (VA) to reconstruct the hydrographic fields, combining the 1-km horizontal resolution of the Underway Conductivity-Temperature-Depth (CTD) system with information on the flow shape from the Acoustic Doppler Current Profiler velocities. One advantage of the VA is given by the physical constraint, which preserves fine-scale gradients better than the classical optimal interpolation (OI). A comparison between real drifter trajectories and virtual particles advected in the mapping quantified the improvements in the VA over the OI, with a 15% larger skill score. Quasi-geostrophic (QG) and semi-geostrophic (SG) omega equations enabled us to estimate the vertical velocity (w) which reached 40 m/day on the dense side of the front. How nutrients and other passive tracers leave the mixed-layer and subduct is estimated with 3D advection from the VA, which agreed with biological sampling from traditional CTD casts at two eddy locations. Downwelling warm filaments are further evidence of subduction, in line with the w from SG, but not with QG. SG better accounted for the along-isopycnal component of w in agreement with another analysis made on isopycnal coordinates. The multi-platform approach of this work and the use of variational methods improved the characterization and understanding of (sub)-mesoscale frontal dynamics.

The drag coefficient under tropical cyclones and its dependence on sea states are investigated by combining upper ocean current observations (using EM-APEX floats deployed under five tropical cyclones) and a coupled ocean-wave (Modular Ocean Model 6 - WAVEWATCH III) model. The estimated drag coefficient averaged over all storms is around 2–3 x 10^−3 for wind speeds 25–55 m/s. While the drag coefficient weakly depends on wind speed in this wind speed range, it shows stronger dependence on sea states. In particular, it is significantly reduced when the misalignment angle between the dominant wave direction and the wind direction exceeds about 45°, a feature which is underestimated by current models of sea state dependent drag coefficient. Since the misaligned swell is more common in the far front and in the left front quadrant of the storm (in the Northern Hemisphere), the drag coefficient also tends to be lower in these areas and shows a distinct spatial distribution. Our results therefore support ongoing efforts to develop and implement sea state dependent parameterizations of the drag coefficient in tropical cyclone conditions.

Microstructure measurements from two cruises during winter and spring 2019 documented the importance of double diffusion processes for small-scale mixing in the upper 400 m of the open ocean region of the eastern Arabian Sea (EAS) below the mixed layer. The data indicated that shear-driven mixing rates are weak, contributing diapycnal diffusivity (K_ρ) of not more than 5.4x10⁶ m² s¹ in the EAS. Instead, signatures of double diffusion were strong, with the water column favourable for salt fingers in 70% of the region and favourable for diffusive convection in 2–3% of the region. Well-defined thermohaline staircases were present in all the profiles in these regions that occupied 20% of the water column. Strong diffusive convection favourable regime occurred in ∼ 45% of data in the barrier layer region of the southern EAS (SEAS). Comparison of different parameterizations of double diffusion with the measurements of vertical heat diffusivity (K_T) found that the Radko and Smith (2012) salt fingering scheme and the Kelley (1984) diffusive convection schemes best match with the observations. The estimates based on flux law show that the combination of downward heat flux of approximately –3 Wm² associated with salt fingering in the thermocline region of the EAS and the upward heat flux of ~5 Wm² due to diffusive convection in the barrier layer region of the SEAS cools the thermocline.

Oceanic fronts with lateral scales less than 20 km are now known to be one of the major contributors to vertical heat fluxes in the global ocean, which highlights their potential impact on Earth's climate. However, frontal dynamics with time scales less than 1 day, whose contribution to vertical heat fluxes is thought to be significant, are obscured by energetic internal gravity waves (IGWs). In this study, we address this critical issue by separating IGWs and frontal dynamics using an approach based on their respective vertical scales of variability. Results using a numerical model with a horizontal grid spacing of 500 m confirm that it is possible to recover frontal dynamics at short time scales as well as associated intense vertical velocities and vertical heat fluxes. This opens up new possibilities for a more accurate estimation of the vertical exchanges of any tracers between the surface and the ocean interior.

We study the nature of ocean currents forced by summer monsoon winds in the Bay of Bengal using data from two cruises within a pool of low-salinity (<32 psμ) river water, and one cruise outside the low-salinity pool. Upper ocean (5–70 m) temperature, salinity, and velocity profiles were measured at sub-kilometer horizontal resolution along the 800–1800-km-long cruise tracks. We find that beneath the river water, density stratification at 5–15 m depth can be 10 times stronger than typically seen in much of the subtropical or tropical ocean. The shallow salinity-dominated stratification suppresses shear-induced turbulence, thereby "trapping" momentum input from monsoon winds in the uppermost 20 m of the ocean. Estimates of directly wind-forced ocean currents are consistent with Ekman depth scaling. In the presence of river water, cruise-mean wind-forced currents resemble tightly surface trapped Ekman-like spirals: The shallowest measured current at 5 m depth has a speed of nearly 0.2 m/s, directed 80° to the right of the wind. Outside the pool of river water, wind momentum penetrates to 40 m depth.

A crucial region of the ocean surface boundary layer (OSBL) is the strongly-sheared and -stratified transition layer (TL) separating the mixed layer from the upper pycnocline, where a diverse range of waves and instabilities are possible. Previous work suggests that these different waves and instabilities will lead to different OSBL behaviours. Therefore, understanding which physical processes occur is key for modelling the TL. Here we present observations of the TL from a Lagrangian float deployed for 73 days near Ocean Weather Station Papa (50°N, 145°W) during Fall 2018. The float followed the vertical motion of the TL, continuously measuring profiles across it using an ADCP, temperature chain and salinity sensors. The temperature chain made depth/time images of TL structures with a resolution of 6 cm and 3 seconds. These showed the frequent occurrence of very sharp interfaces, dominated by temperature jumps of O(1)°C over 6 cm or less. Temperature inversions were typically small (less than about 10 cm), frequent, and strongly-stratified; very few large overturns were observed. The corresponding velocity profiles varied over larger length scales than the temperature profiles. These structures are consistent with scouring behaviour rather than Kelvin–Helmholtz-type overturning. Their net effect, estimated via a Thorpe-scale analysis, suggests that these frequent small temperature inversions can account for the observed mixed layer deepening and entrainment flux. Corresponding estimates of dissipation, diffusivity, and heat fluxes also agree with previous TL studies, suggesting that the TL dynamics is dominated by these nearly continuous 10-cm scale mixing structures, rather than by less frequent larger overturns.

We use profiles from a Lagrangian float in the north Indian Ocean to explore the usefulness of Thorpe analysis methods to measure vertical scales and dissipation rates in the ocean surface boundary layer. An rms Thorpe length scale L_T and an energy dissipation rate ε_T were computed by resorting the measured density profiles. These are compared to the mixed layer depth (MLD) computed with different density thresholds, the Monin–Obukhov (MO) length LMO computed from the ERA5 reanalysis values of wind stress, and buoyancy flux B₀ and dissipation rates ε from historical microstructure data. The Thorpe length scale L_T is found to accurately match MLD for small (<0.005 kg m^-3) density thresholds, but not for larger thresholds, because these do not detect the warm diurnal layers. We use ξ = L_T/|L_MO| to classify the boundary layer turbulence during nighttime convection. In our data, 90% of points from the Bay of Bengal (Arabian Sea) satisfy ξ < 1 (1 < ξ < 10), indicating that wind forcing is (both wind forcing and convection are) driving the turbulence. Over the measured range of ξ, ε_T decreases with decreasing ξ, i.e., more wind forcing, while ε increases, clearly showing that ε/ε_T decreases with increasing ξ. This is explained by a new scaling for ξ << 1, ε/ε_T = 1.15B₀ξ^0.5 compared to the historical scaling ε = 0.64B₀ + 1.76ξ^-1. For ξ << 1 we expect ε = ε_T. Similar calculations may be possible using routine Argo float and ship data, allowing more detailed global measurements of ε_T, thereby providing large-scale tests of turbulence scaling in boundary layers.

We use profiles from a Lagrangian Float in the North Indian Ocean to explore the usefulness of Thorpe analysis methods to measure vertical scales and dissipation rates in the ocean surface boundary layer. An rms Thorpe length scale L_T and an energy dissipation rate ε_T were computed by resorting the measured density profiles. These are compared to the mixed layer depth (MLD) computed with different density thresholds, the Monin–Obukhov (MO) length LMO computed from the ERA5 reanalysis values of wind stress and buoyancy flux B₀ and dissipation rates ε from historical microstructure data. L_T is found to accurately match MLD for small (<0.005 kgm^-3) density thresholds, but not for larger thresholds, because these do not detect the warm diurnal layers. We use ξ = L_T/|L_MO| to classify the boundary layer turbulence during night-time convection. In our data, 90% of points from the Bay of Bengal (Arabian Sea) satisfy ξ < 1 (1 < ξ < 10), indicating that wind forcing is (both wind forcing and convection are) driving the turbulence. Over the measured range of ξ, ε_T decreases with decreasing ξ, i.e. more wind forcing, while ε; increases, clearly showing that ε/ε_T decreases with increasing ξ. This is explained by a new scaling for ξ << 1, ε_T = 1.15 B ₀ ξ^0.5 compared to the historical scaling ε = 0.64 B ₀ + 1.76ξ^-1. For ξ >> 1 we expect ε = ε_T. Similar calculations may be possible using routine ARGO float and ship data, allowing more detailed global measurements of ε_T thereby providing large-scale tests of turbulence scaling in boundary layers.

The oceanic surface mixed layer salinity (MLS) budget of the central and eastern equatorial Indian Ocean during boreal fall and winter is studied using in-situ and remote sensing measurements. Budgets on roughly 100 km scale were constructed using data from two DYNAMO and two RAMA moorings near 79°E during September 2011 to January 2012. The horizontal advective salinity flux plays a significant role in the seasonal variation of equatorial MLS. In boreal fall the equatorial and 1.5°S MLS increases due to horizontal advection and turbulent mixing, despite the freshening surface flux associated with MJOs. In boreal winter, with larger sub-monthly variation and uncertainties, the decreasing of equatorial MLS is accounted by freshening zonal advection and surface flux, abated by salty meridional advection; the 1.5°S MLS is explained by the combination of freshening meridional advection and surface flux, and salty zonal advection. Budgets between 2011 and 2015 are investigated using data products from TRMM, Aquarius, OSCAR, OAFlux and Argo mixed layers over a wider region. The eastward development of the equatorial salinity tongue in the central to eastern Indian Ocean in boreal fall and the westward retreat in boreal winter is largely determined by the equatorial zonal current. The meridional migration of ITCZ rainfall plays a secondary role. In order to improve model prediction skills of MLS changes in the equatorial Indian Ocean, both zonal and meridional salinity advective fluxes, at a spatial scale of 1° longitude and latitude and a time scale less than days, need to be properly simulated.

Vertical transport generated by mesoscale and submesoscale flows plays a key role in the exchange of physical and biogeochemical properties between the surface and the ocean interior. Using multiple simultaneous drifter observations, we compute spatial gradients of velocity to obtain estimates of the divergence field. Thanks to the fact that drifters were deployed at two different depths, we can observe the vertical dependence of divergence in the upper 15 m and estimate the associated vertical velocity. In this study, we estimate divergence and vertical velocity in a ~1-m/s semipermanent frontal jet in the Alboran Sea by making use of a multiplatform data set including 82 drifters, a Lagrangian float, and along-shiptrack profile timeseries of temperature and salinity.

Monin–Obukhov Similarity Theory (MOST) provides important scaling laws for flow properties in the surface layer of the atmosphere and has contributed to most of our understanding of the near-surface turbulence. The prediction of near-surface vertical mixing in most operational ocean models is largely built upon this theory. However, the validity of MOST in the upper ocean is questionable due to the demonstrated importance of surface waves in the region. Here we examine the validity of MOST in the statically unstable oceanic surface layer, using data collected from two open ocean sites with different wave conditions. The observed vertical temperature gradients are found to be about half of those predicted by MOST. We hypothesize this is attributable to either the breaking of surface waves, or Langmuir turbulence generated by the wave-current interaction. Existing turbulence closure models for surface wave breaking and for Langmuir turbulence are simplified to test these two hypotheses. Although both models predict reduced temperature gradients, the simplified Langmuir turbulence model matches observations more closely, when appropriately tuned.

The role of gas bubbles on the air‐sea CO₂ flux during Hurricane Frances (2004) is studied using a large‐eddy simulation model that couples ocean surface boundary layer turbulence, gas bubbles, and dissolved gases. In the subtropical surface ocean where gases are slightly supersaturated, gases in bubbles can still dissolve due to hydrostatic pressure and surface tension exerted on bubbles. Under the simulated conditions, the CO₂ efflux with an explicit bubble effect is less than 2% of that calculated using a gas flux formula without explicit inclusion of bubble effect. The use of a gas flux parameterization without bubble‐induced supersaturation contributes to uncertainty in the global carbon budget. The results highlight the importance of bubbles under high winds even for soluble gases such as CO₂ and demonstrate that gas flux parameterization derived from gases of certain solubility may not be accurate for gases of very different solubility.

Using high-resolution measurements of the Gulf Stream North Wall (GSNW), we investigated whether detachments from the warm current at the edge of the front, known as streamers, affect the overall heat and salt content of the region. Temperature, salinity, and velocity data were collected across the front from towed CTDs, shipboard ADCPs, and gliders following a Lagrangian drifter that was deployed at the GSNW during winter 2012. Four streamers were identified, all of which expanded laterally 10–15 km, with vertical salinity interleaving down to a 200 m depth. We observed that temperature and salinity (T/S) increased along the trajectory of the Lagrangian float. These trends were density compensated and ranged from the surface down to a 200 m depth and across a 5 km band. The heat and salt budget analysis showed that surface fluxes, advection due to large-scale circulation, and diapycnal mixing could not explain the observed increase in T/S in the mixed layer and in the subsurface area. The only possible source that could explained the increase in T/S was along-isopycnal mixing. Estimates of the Reynolds transport supported this conclusion, although the low number of realizations meant these estimates were not statistically significant. From the heat and salt budgets, we observed that an along-isopycnal diffusivity, k_i, of 110 ± 30 m²s^-1 accounted for the estimated residual and matched the Reynolds transport estimates. This value of is consistent with other studies that assert that lateral mixing is required for the production of Eighteen Degree Water (EDW) subtropical mode water.

Oxygen levels within the oxygen deficient zone (ODZ) of the Bay of Bengal are mapped using 11 ARGO floats spanning 5 years. North of about 18°N in the ODZ 'core', minimum oxygen levels are uniformly below ~1 µmol kg^-1. South of this, in the ODZ 'edge', oxygen levels increase toward an average of about 7 µmol kg^-1 at 10°N, but with high variability so that values below ~1 µmol kg^-1 occur at all latitudes. This variability is consistent with simple models of mesoscale eddy stirring which suggest an exchange time for the core of about 1 year. Existing measurements of microbial transformation of nitrate to N₂ in the Bay of Bengal have only been made in the edge region and may underestimate rates in the core region with lowest O₂ concentration and thus the overall N transformation rates in this ODZ.

The Gulf Stream front separates the North Atlantic subtropical and subpolar ocean gyres, water masses with distinct physical and biogeochemical properties. Exchange across the front is believed to be necessary to balance the freshwater budget of the subtropical gyre and to support the biological productivity of the region; however, the physical mechanisms responsible have been the subject of long-standing debate. Here, the evolution of a passive dye released within the north wall of the Gulf Stream provides direct observational evidence of enhanced mixing across the Gulf Stream front. Numerical simulations indicate that the observed rapid cross-frontal mixing occurs via shear dispersion, generated by frontal instabilities and episodic vertical mixing. This provides unique direct evidence for the role of submesoscale fronts in generating lateral mixing, a mechanism which has been hypothesized to be of general importance for setting the horizontal structure of the ocean mixed layer. Along the Gulf Stream front in the North Atlantic, these observations further suggest that shear dispersion at sharp fronts may provide a source of freshwater flux large enough to explain much of the freshwater deficit in the subtropical-mode water budget and a flux of nutrients comparable to other mechanisms believed to control primary productivity in the subtropical gyre.

Predicting the distribution of oil, buoyant plastics, flotsam, and marine organisms near the ocean surface remains a fundamental problem of practical importance. This manuscript synthesizes progress in this area during the time of the Gulf of Mexico Research Initiative (GoMRI; 2012–2019), with an emphasis on the accumulation of floating material into highly concentrated streaks on horizontal scales of meters to 10's of kilometers. Prior to the GoMRI period, two new paradigms emerged: the importance of submesoscale frontal dynamics on the larger scales and of surface-wave-driven Langmuir turbulence on the smaller scales, with a broad transition occurring near 100 m. Rapid progress resulted from the combination of high resolution numerical modeling tools, mostly developed before GoMRI, and new observational techniques developed during GoMRI. Massive deployments of inexpensive and biodegradable satellite-tracked surface drifters combined with aerial tracking of oil surrogates (drift cards) enabled simultaneous observations of surface ocean velocities and dispersion over scales of 10 m to 10's of kilometers. Surface current maps produced by ship-mounted radar and aerial optical remote sensing systems, combined with traditional oceanographic tools, enabled a set of coordinated measurement programs that supported and expanded the new paradigms. Submesoscale fronts caused floating material to both accumulate at fronts and to disperse as they evolved, leading to higher local concentrations, but increased overall dispersion. Analyses confirmed the distinct submesoscale dynamics of this process and the complexity of the resulting fields. Existing tools could be developed into predictive models of submesoscale statistics, but prediction of individual submesoscale features will likely remain limited by data. Away from fronts, measured rates of accumulation of material in and beneath surface windrows was found to be consistent with Langmuir turbulence, but highly dependent on the rise rate of the material and thus, for oil, on the droplet size. Models of this process were developed and tested and could be further developed into predictive tools. Both the submesoscale and Langmuir processes are sensitive to coupling with surface waves and air-sea flux processes. This sensitivity is a promising area for future studies.

A coordinated survey between a subsurface Lagrangian float and a ship-towed Triaxus profiler obtained detailed measurements of a restratifying surface intensified front (above 30 m) within the California Current System. The survey began as downfront winds incited mixing in the boundary layer. As winds relaxed and mixing subsided, the system entered a different dynamical regime as the front developed an overturning circulation with large vertical velocities that tilted isopycnals and stratified the upper ocean within a day. The horizontal buoyancy gradient was 1.5 x 10^-6 s^-2 and associated with vorticity, divergence, and strain that approached the Coriolis frequency. Estimates of vertical velocity from the Lagrangian float reached 1.2 x 10^-3 m s^-1. These horizontal gradients and vertical velocities were consistent with submesoscale dynamics that are distinct from the classic quasigeostrophic framework used to describe larger-scale flows. Vertical and horizontal gradients of velocity and buoyancy in the vicinity of the float revealed that sheared currents differentially advected the horizontal buoyancy gradient to increase vertical stratification. This was supported by analyses of temperature and salinity gradients that composed the horizontal and vertical stratification. Potential vorticity was conserved during restratification at 16 m, consistent with adiabatic processes. Conversely, potential vorticity near the surface (8 m) increased, highlighting the role of friction in modulating near-surface stratification. The observed increase in stratification due to these submesoscale processes was equivalent to a heat flux of 2000 W m^-2, which is an order-of-magnitude larger than the average observed surface heat flux of 100 W m^-2.

A coordinated multiplatform campaign collected detailed measurements of a restratifying surface intensified upwelling front within the California Current System. A companion paper outlined the evolution of the front, revealing the importance of lateral advection at tilting isopycnals and increasing stratification in the surface boundary layer with a buoyancy flux equivalent to 2000 W m^-2. Here, observations were compared with idealized models to explore the dynamics contributing to the stratification. A 2D model combined with a reduced form of the horizontal momentum equations highlight the importance of transient Ekman dynamics, turbulence, and thermal wind imbalance at modulating shear in the boundary layer. Specifically, unsteady frictional adjustment to the rapid decrease in wind stress created vertically sheared currents that advected horizontal gradients to increase vertical stratification on superinertial time scales. The magnitude of stratification depended on the strength of the horizontal buoyancy gradient. This enhanced stratification due to horizontal advection inhibited nighttime mixing that would have otherwise eroded stratification from the diurnal warm layer. This underscores the importance of near-surface lateral restratification for the upper ocean buoyancy budget on diel time scales.

The goal of the Waves, Langmuir Cells and the Upper Ocean Boundary Layer Departmental Research Initiative (LC–DRI) is to explore the upper ocean physics necessary to advance our understanding of the fluxes into and across the ocean mixed layer, including surface waves and wave breaking, Langmuir cells, and wave–current interaction. A set of comprehensive observational data was collected during the LC–DRI field experiment from various platforms including autonomous floats, drifter, buoys, and shipboard observations. The field campaign was conducted on the coast of Southern California 21 March – 5 April 2017. The fieldwork, including the event log and instrument deployment, is described in Part I. The inter-calibration between observed CTD data from EM-APEX and MLF floats, SWIFT drifters and R/V Sproul are described in Part II. For the MLF vs. EM-APEX calibration, the average salinity of MLF #82 and #83 top and bottom sensors is used as a reference. The calculated salinity offset for EM-APEX #6667, #6672, and #6678 is ~ 0.004 psu, for EM-APEX #6671 and #6674 is ~0.001 psu, and for EM-APEX #6675 is ~–0.001 psu. For seven SWIFT drifters at 0.2, 0.5, and 1.2 m, the calculated temperature offset varies from –0.1 to 0.1°C and the salinity offset varies from –0.003 to 0.2 psu. The salinity data from SWIFT #16 and #17 at 0.2 m exhibited large offsets, which suggest data bias. The comparison of wave energy measurements between SWIFT drifters and a Datawell Waverider buoy moored at CDIP station 299 are described in Part III. Excluding the periods when the mean separation distance was greater than 30 km (periods 3−1, 3, 5, 6, 8, 12), the root-mean-square error (RMSE) of significant wave height (Hs) is 0.25 ± 0.08 m, the RMSE of integrated wave energy is 0.057 ± 0.029 m², and the average percent error of Hs is ~13%. In general, given the temporal, spatial, and spectral differences in the sampling strategy of SWIFTdrifters and the CDIP buoy, the comparison suggests no significant bias in either dataset.

An autonomous Lagrangian float equipped with a high-resolution acoustic Doppler current profiler observed the evolution of upper-ocean stratification and velocity in the Eastern Pacific Fresh Pool for over 100 days in August–November 2016. Although convective mixing homogenized the water column to 40 m depth almost every night, the combination of diurnal warming on clear days and rainfall on cloudy days routinely produced strong stratification in the upper 10 m. Whether due to thermal or freshwater effects, the initial strong stratification was mixed downward and incorporated in the bulk of the mixed layer within a few hours. Stratification cycling was associated with pronounced variability of ocean surface boundary layer turbulence and vertical shear of wind-driven (Ekman) currents. Decoupled from the bulk of the mixed layer by strong stratification, warm and fresh near-surface waters were rapidly accelerated by wind, producing the well-known "slippery layer" effect, and leading to a strong downwind near-surface distortion of the Ekman profile. A case study illustrates the ability of the new generation of Lagrangian floats to measure rapidly evolving temperature, salinity, and velocity, including turbulent and internal wave components. Quantitative interpretation of the results remains a challenge, which can be addressed with high-resolution numerical modeling, given sufficiently accurate air-sea fluxes.

Cyclone Phailin, which developed over the Bay of Bengal in October 2013, was one of the strongest tropical cyclones to make landfall in India. We study the response of the salinity-stratified north Bay of Bengal to Cyclone Phailin with the help of hourly observations from three open-ocean moorings 200 km from the cyclone track, a mooring close to the cyclone track, daily sea surface salinity (SSS) from Aquarius, and a one-dimensional model. Before the arrival of Phailin, moored observations showed a shallow layer of low-salinity water lying above a deep, warm "barrier" layer. As the winds strengthened, upper-ocean mixing due to enhanced vertical shear of storm-generated currents led to a rapid increase of near-surface salinity. Sea surface temperature (SST) cooled very little, however, because the prestorm subsurface ocean was warm. Aquarius SSS increased by 1.5–3 psu over an area of nearly one million square kilometers in the north Bay of Bengal. A one-dimensional model, with initial conditions and surface forcing based on moored observations, shows that cyclone winds rapidly eroded the shallow, salinity-dominated density stratification and mixed the upper ocean to 40–50-m depth, consistent with observations. Model sensitivity experiments indicate that changes in ocean mixed layer temperature in response to Cyclone Phailin are small. A nearly isothermal, salinity-stratified barrier layer in the prestorm upper ocean has two effects. First, near-surface density stratification reduces the depth of vertical mixing. Second, mixing is confined to the nearly isothermal layer, resulting in little or no SST cooling.

The forecast of tropical cyclone intensification is critical to the protection of coastlines, involving the complicated tropical cyclone‐ocean interaction. The wind of storms can force strong near‐inertial current via surface wind stress (often parameterized by a drag coefficient C_d), and then induce the upper ocean cooling due to the shear instability. The transferred momentum and reduced heat supply can both restrict tropical cyclones' development. In other words, the C_d can affect the prediction of momentum and thermal response under storms, and thereby the forecast on storm intensity. This study investigates the spatial variability of downwind drag coefficient C_d under five different tropical cyclones, by integrating the storm‐induced ocean momentum because previous results of C_d as a function of wind speed |U₁₀| are scattered significantly at |U₁₀|= 25–40 m/s. Here, larger C_d in the front‐right sector of faster storms than that of slower stoms is found, presumably due to the surface wave effect. A new parameterization of C_d using the surface wave properties under tropical cyclones is proposed, which largely improves the conventional parameterization of C_d(|U₁₀|). Future studies on the tropical cyclone‐wave‐ocean interaction and storm intensification forecast will be benefited from this new parameterization.

A year‐long mooring data are used to study the upper ocean unstable events and instabilities at 18°N 89°E, which is a climatologically important region in the North Bay of Bengal. Near‐surface stability is studied from the context of the buoyancy frequency normalized shear (V_z/N) and reduced shear (S²–4N²) which are convenient measures to quantify flow stability, compared to the more widely used Richardson number (Ri). The analysis is carried out across three contrasting time periods, the monsoon, postmonsoon, and the winter of year 2012. Although it is well known that the flow stability changes from stable to unstable at Ri = Ri_cr=0.25, the relative importance of the perturbations of shear and buoyancy frequency in driving the unstable events is not well studied over the open oceans and more particularly over the Bay of Bengal. At 18°N, 89°E both higher than average shear and lower than average buoyancy frequency perturbations are crucial in driving the unstable events during the summer and premonsoon period. However, at increasing depths, the influence of shear perturbations becomes more dominant. Invoking the Miles–Howard criteria for flow instability, it is seen that during the postmonsoon period, the buoyancy frequency perturbations are more critical than shear perturbations in driving the unstable events. In winter, the unstable events are influenced by both the buoyancy frequency and shear perturbations.

Highlights

- A new gas tension device (GTD) improves on previous designs of GTDs.

- The new GTD can operate up to 1000 m depth with no pressure dependency.

- Two GTDs successfully measured total dissolved gases in an Oxygen Minimum Zone.

- The GTDs were accurate to ±0.6% compared with independent dissolved gas data.

Fixation of organic carbon by phytoplankton is the foundation of nearly all open-ocean ecosystems and a critical part of the global carbon cycle. But the quantification and validation of ocean primary productivity at large scale remains a major challenge due to limited coverage of ship-based measurements and the difficulty of validating diverse measurement techniques. Accurate primary productivity measurements from autonomous platforms would be highly desirable due to much greater potential coverage. In pursuit of this goal we estimate gross primary productivity over 2 months in the springtime North Atlantic from an autonomous Lagrangian float using diel cycles of particulate organic carbon derived from optical beam attenuation. We test method precision and accuracy by comparison against entirely independent estimates from a locally parameterized model based on chlorophyll a and light measurements from the same float. During nutrient-replete conditions (80% of the study period), we obtain strong relative agreement between the independent methods across an order of magnitude of productivities (r²â€‰= 0.97), with slight underestimation by the diel cycle method (–19±5%). At the end of the diatom bloom, this relative difference increases to –58% for a 6-day period, likely a response to SiO₄ limitation, which is not included in the model. In addition, we estimate gross oxygen productivity from O₂ diel cycles and find strong correlation with diel-cycle-based gross primary productivity over the entire deployment, providing further qualitative support for both methods. Finally, simultaneous estimates of net community productivity, carbon export, and particle size suggest that bloom growth is halted by a combination of reduced productivity due to SiO₄ limitation and increased export efficiency due to rapid aggregation. After the diatom bloom, high Chl a-normalized productivity indicates that low net growth during this period is due to increased heterotrophic respiration and not nutrient limitation. These findings represent a significant advance in the accuracy and completeness of upper-ocean carbon cycle measurements from an autonomous platform.

Seven subsurface Electromagnetic Autonomous Profiling Explorer (EM-APEX) floats measured the voltage induced by the motional induction of seawater under Typhoon Fanapi in 2010. Measurements were processed to estimate high-frequency oceanic velocity variance associated with surface waves. Surface wave peak frequency f_p and significant wave height H_s are estimated by a nonlinear least squares fitting to oceanic velocity, assuming a broadband JONSWAP surface wave spectrum. The H_s is further corrected for the effects of float rotation, Earth's geomagnetic field inclination, and surface wave propagation direction. The f_p is 0.08–0.10 Hz, with the maximum f_p of 0.10 Hz in the rear-left quadrant of Fanapi, which is ~0.02 Hz higher than in the rear-right quadrant. The H_s is 6–12 m, with the maximum in the rear sector of Fanapi. Comparing the estimated f_p and H_s with those assuming a single dominant surface wave yields differences of more than 0.02 Hz and 4 m, respectively. The surface waves under Fanapi simulated in the WAVEWATCH III (ww3) model are used to assess and compare to float estimates. Differences in the surface wave spectra of JONSWAP and ww3 yield uncertainties of <5% outside Fanapi’s eyewall and >10% within the eyewall. The estimated f_p is 10% less than the simulated ww3 peak wave frequencey before the passage of Fanapi’s eye and 20% less after eye passage. Most differences between H_s and simulated ww3 significant wave height are <2 m except those in the rear-left quadrant of Fanapi, which are ~5 m. Surface wave estimates are important for guiding future model studies of tropical cyclone wave–ocean interactions.

The Lagrangian Submesoscale Experiment (LASER) was designed to study surface flows during winter conditions in the northern Gulf of Mexico. More than 1000 mostly biodegradable drifters were launched. The drifters consisted of a surface floater extending 5 cm below the surface, containing the satellite tracking system, and a drogue extending 60 cm below the surface, hanging beneath the floater on a flexible tether. On some floats, the drogue separated from the floater during storms. This paper describes methods to detect drogue loss based on two properties that distinguish drogued from undrogued drifters. First, undrogued drifters often flip over, pointing their satellite antenna downward and thus intermittently reducing the frequency of GPS fixes. Second, undrogued drifters respond to wind forcing more than drogued drifters. A multistage analysis is used: first, two properties are used to create a preliminary drifter classification; then, the motion of each unclassified drifter is compared to that of its classified neighbors in an iterative process for nearly all of the drifters. The algorithm classified drifters with a known drogue status with an accuracy of virtually 100%. Drogue loss times were estimated with a precision of less than 0.5 and 3 h for 60% and 85% of the drifters, respectively. An estimated 40% of the drifters lost their drogues in the first 7 weeks, with drogue loss coinciding with storm events, particularly those with steep waves. Once the drogued and undrogued drifters are classified, they can be used to quantify the differences in material dispersion at different depths.

Oxygen minimum zones (OMZs) play important roles in regulating the ocean's global carbon and nitrogen cycles. In these functionally anoxic waters, denitrifying and anammox (short for anaerobic ammonium oxidation) microbes remove nitrogenous nutrients from the biosphere by transformation to biologically unavailable nitrogen gas (N₂). A newly developed sensor can detect this "excess" N₂ in OMZ regions in order to quantify these nitrogen-loss processes. The near-term goal is to explore OMZs and collect high-quality excess N₂ data to document their baseline inventories. The long-term objective is to determine if excess N₂ inventories in OMZs are increasing as a result of ocean deoxygenation.

This paper describes the instrumentation and techniques for long-term targeted observation of the centimeter-scale velocity structure within the oceanic surface boundary layer, made possible by the recent developments in capabilities of autonomous platforms and self-contained pulse-coherent acoustic Doppler current profilers (ADCPs). Particular attention is paid to the algorithms of ambiguity resolution ("unwrapping") of pulse-coherent Doppler velocity measurements. The techniques are demonstrated using the new Nortek Signature1000 ADCP mounted on a Lagrangian float, a combination shown to be capable of observing ocean turbulence in a number of recent studies. Statistical uncertainty of the measured velocities in relation to the ADCP setup is also evaluated. Described techniques and analyses should be broadly applicable to other autonomous and towed applications of pulse-coherent ADCPs.

Ocean currents move material released on the ocean surface away from the release point and, over time, spread it over an increasingly large area. However, observations also show high concentrations of the material even after significant spreading. This work examines a mechanism for creating such concentrations: downwelling of water at the boundaries of different water masses concentrates floating material at this boundary. Hundreds of satellite-tracked drifters were released near the site of the 2010 Deepwater Horizon oil spill. Surprisingly, most of these gathered into a single cluster less than 100 m in size, dramatically demonstrating the strength of this mechanism.

High-resolution, nearly Lagrangian observations of velocity and density made in the North Wall of the Gulf Stream reveal banded shear structures characteristic of near-inertial waves (NIWs). Here, the current follows submesoscale dynamics, with Rossby and Richardson numbers near one, and the vertical vorticity is positive. This allows for a unique analysis of the interaction of NIWs with a submesoscale current dominated by cyclonic as opposed to anticyclonic vorticity. Rotary spectra reveal that the vertical shear vector rotates primarily clockwise with depth and with time at frequencies near and above the local Coriolis frequency f. At some depths, more than half of the measured shear variance is explained by clockwise rotary motions with frequencies between f and 1.7f. The dominant superinertial frequencies are consistent with those inferred from a dispersion relation for NIWs in submesoscale currents that depends on the observed aspect ratio of the wave shear as well as the vertical vorticity, baroclinicity, and stratification of the balanced flow. These observations motivate a ray tracing calculation of superinertial wave propagation in the North Wall, where multiple filaments of strong cyclonic vorticity strongly modify wave propagation. The calculation shows that the minimum permissible frequency for inertia–gravity waves is mostly greater than the Coriolis frequency, and superinertial waves can be trapped and amplified at slantwise critical layers between cyclonic vortex filaments, providing a new plausible explanation for why the observed shear variance is dominated by superinertial waves.

Mixing efficiency is the ratio of the net change in potential energy to the energy expended in producing the mixing. Parameterizations of efficiency and of related mixing coefficients are needed to estimate diapycnal diffusivity from measurements of the turbulent dissipation rate. Comparing diffusivities from microstructure profiling with those inferred from the thickening rate of four simultaneous tracer releases has verified, within observational accuracy, 0.2 as the mixing coefficient over a 30-fold range of diapycnal diffusivities. Although some mixing coefficients can be estimated from pycnocline measurements, at present mixing efficiency must be obtained from channel flows, laboratory experiments, and numerical simulations. Reviewing the different approaches demonstrates that estimates and parameterizations for mixing efficiency and coefficients are not converging beyond the at-sea comparisons with tracer releases, leading to recommendations for a community approach to address this important issue.

The Salinity Processes in the Upper-ocean Regional Study (SPURS) aims to understand the patterns and variability of sea surface salinity. In order to capture the wide range of spatial and temporal scales associated with processes controlling salinity in the upper ocean, research vessels delivered autonomous instruments to remote sites, one in the North Atlantic and one in the Eastern Pacific. Instruments sampled for one complete annual cycle at each of these two sites, which are subject to contrasting atmospheric forcing. The SPURS field programs coordinated sampling from many different platforms, using a mix of Lagrangian and Eulerian approaches. This article discusses the motivations, implementation, and first results of the SPURS-1 and SPURS-2 programs.

Oceanic bubbles play an important role in the air-sea exchange of weakly soluble gases at moderate to high wind speeds. A Lagrangian bubble model embedded in a large eddy simulation model is developed to study bubbles and their influence on dissolved gases in the upper ocean. The transient evolution of mixed-layer dissolved oxygen and nitrogen gases at Ocean Station Papa (50°N, 145°W) during a winter storm is reproduced with the model. Among different physical processes, gas bubbles are the most important in elevating dissolved gas concentrations during the storm, while atmospheric pressure governs the variability of gas saturation anomaly (the relative departure of dissolved gas concentration from the saturation concentration). For the same wind speed, bubble-mediated gas fluxes are larger during rising wind with smaller wave age than during falling wind with larger wave age. Wave conditions are the primary cause for the bubble gas flux difference: when wind strengthens, waves are less-developed with respect to wind, resulting in more frequent large breaking waves. Bubble generation in large breaking waves is favorable for a large bubble-mediated gas flux. The wave-age dependence is not included in any existing bubble-mediated gas flux parameterizations.

Estimates of drag coefficients beneath Typhoon Megi (2010) are calculated from roughly hourly velocity profiles of three EM-APEX floats, air launched ahead of the storm, and from air-deployed dropsondes measurements and microwave estimates of the 10-m wind field. The profiles are corrected to minimize contributions from tides and low-frequency motions and thus isolate the current induced by Typhoon Megi. Surface wind stress is computed from the linear momentum budget in the upper 150 m. Three-dimensional numerical simulations of the oceanic response to Typhoon Megi indicate that with small corrections, the linear momentum budget is accurate to 15% before the passage of the eye but cannot be applied reliably thereafter. Monte Carlo error estimates indicate that stress estimates can be made for wind speeds greater than 25 m s^-1; the error decreases with greater wind speeds. Downwind and crosswind drag coefficients are computed from the computed stress and the mapped wind data. Downwind drag coefficients increase to 3.5 ± 0.7 x 10^-3 at 31 m s^-1, a value greater than most previous estimates, but decrease to 2.0 ± 0.4 x 10^-3 for wind speeds > 45 m s^-1, in agreement with previous estimates. The crosswind drag coefficient of 1.6 ± 0.5 x 10^-3 at wind speeds 30–45 m s^-1 implies that the wind stress is about 20° clockwise from the 10-m wind vector and thus not directly downwind, as is often assumed.

Because the monsoon strongly affects India, there is a clear need for indigenous expertise in advancing the science that underlies monsoon prediction. The safety of marine transport in the tropics relies on accurate atmospheric and ocean environment predictions on weekly and longer time scales in the Indian Ocean. This need to better forecast the monsoon motivates the United States to advance basic research and support training of early career US scientists in tropical oceanography. Earlier Indian field campaigns and modeling studies indicated that an improved understanding of the interactions between the upper ocean and the atmosphere in the Bay of Bengal at finer spatial and temporal scales could lead to improved intraseasonal monsoon forecasts. The joint US Air-Sea Interactions Regional Initiative (ASIRI) and the Indian Ocean Mixing and Monsoon (OMM) program studied these interactions, resulting in scientific advances described by articles in this special issue of Oceanography. In addition to these scientific advances, and while also developing long-lasting collaborations and building indigenous Indian capability, a key component of these programs is training early career scientists from India and the United States. Training has been focusing on fine-scale and mixing studies of the upper ocean, air-sea interactions, and marine mammal research. Advanced methods in instrumentation, autonomous robotic platforms, experimental design, data analysis, and modeling have been emphasized. Students and scientists from India and the United States at all levels have been participating in joint cruises on Indian and US research vessels and in training participants in modern tools and methods at summer schools, at focused research workshops, and during research visits. Such activities are building new indigenous capability in India, training a new cadre of US scientists well versed in monsoon air-sea interaction, and forging strong links between Indian and US oceanographic institutions.

A dedicated drifter experiment was conducted in the northern Bay of Bengal during the 2015 waning southwest monsoon. To sample a variety of spatiotemporal scales, a total of 36 salinity drifters and 10 standard drifters were deployed in a tight array across a freshwater front. The salinity drifters carried for the first time a revised sensor algorithm, and its performance during the 2015 field experiment is very encouraging for future efforts. Most of the drifters were quickly entrained in a mesoscale feature centered at about 16.5°N, 89°E and stayed close together during the first month of observations. While the eddy was associated with rather homogeneous temperature and salinity characteristics, much larger variability was found outside of it toward the coastline, and some of the observed salinity patches had amplitudes in excess of 1.5 psu. To particularly quantify the smaller spatiotemporal scales, an autocorrelation analysis of the drifter salinities for the first two deployment days was performed, indicating not only spatial scales of less than 5 km but also temporal variations of the order of a few hours. The hydrographic measurements were complemented by first estimates of kinematic properties from the drifter clusters, however, more work is needed to link the different observed characteristics.

Submesoscale frontal dynamics are thought to be of leading-order importance for stratifying the upper ocean by slumping horizontal density gradients to produce vertical stratification. Presented here is an investigation of submesoscale instabilities in the mixed layer—mixed layer eddies (MLEs)—as a potential mechanism of frontal slumping that stratifies the upper ocean during the transition from winter to spring, when wintertime forcings weaken but prior to the onset of net solar warming. Observations from the global Argo float program are compared to predictions from a one-dimensional mixed layer model to assess where in the world’s oceans lateral processes influence mixed layer evolution. The model underestimates spring stratification for ~75% ± 25% of the world’s oceans. Relationships between vertical and horizontal temperature and salinity gradients are used to suggest that in 30% ± 20% of the oceans this excess stratification can be attributed to the slumping of horizontal density fronts. Finally, 60% ± 10% of the frontal enhanced stratification is consistent with MLE theory, suggesting that MLEs may be responsible for enhanced stratification in 25% ± 15% of the world’s oceans. Enhanced stratification from frontal tilting occurs in regions of strong horizontal density gradients (e.g., midlatitude subtropical gyres), with a small fraction occurring in regions of deep mixed layers (e.g., high latitudes). Stratification driven by MLEs appears to constrain the coexistence of sharp lateral gradients and deep wintertime mixed layers, limiting mixed layer depths in regions of large lateral density gradients, with an estimated wintertime restratification flux of order 100 W m^−2.

The Gulf Stream is a major conduit of warm surface water from the tropics to the subpolar North Atlantic. Here we observe and simulate a submesoscale (<20 km) mechanism by which the Gulf Stream exchanges water with subpolar water to the north. Along isopycnals, the front has a sharp compensated temperature-salinity contrast, with distinct mixed water between the two water masses 2 and 4 km wide. This mixed water does not increase downstream despite substantial energy available for mixing. A series of streamers detrain this water at the crest of meanders. Subpolar water replaces the mixed water and resharpens the front. The water mass exchange accounts for a northward flux of salt of 0.5–2.5 psu m² s^-1, (large-scale diffusivity O (100 m² s^-1)). This is similar to bulk-scale flux estimates of 1.2 psu m² s^-1 and supplies fresher water to the Gulf Stream required for the production of 18° subtropical mode water.

The passage of a winter storm over the Gulf Stream observed with a Lagrangian float and hydrographic and velocity surveys provided a unique opportunity to study how the interaction of inertial oscillations, the front, and symmetric instability (SI) shapes the stratification, shear, and turbulence in the upper ocean under unsteady forcing. During the storm, the rapid rise and rotation of the winds excited inertial motions. Acting on the front, these sheared motions modulate the stratification in the surface boundary layer. At the same time, cooling and downfront winds generated a symmetrically unstable flow. The observed turbulent kinetic energy dissipation exceeded what could be attributed to atmospheric forcing, implying SI drew energy from the front. The peak excess dissipation, which occurred just prior to a minimum in stratification, surpassed that predicted for steady SI turbulence, suggesting the importance of unsteady dynamics. The measurements are interpreted using a large-eddy simulation (LES) and a stability analysis configured with parameters taken from the observations. The stability analysis illustrates how SI more efficiently extracts energy from a front via shear production during periods when inertial motions reduce stratification. Diagnostics of the energetics of SI from the LES highlight the temporal variability in shear production but also demonstrate that the time-averaged energy balance is consistent with a theoretical scaling that has previously been tested only for steady forcing. As the storm passed and the winds and cooling subsided, the boundary layer restratified and the thermal wind balance was reestablished in a manner reminiscent of geostrophic adjustment.

Lateral stirring is a basic oceanographic phenomenon affecting the distribution of physical, chemical, and biological fields. Eddy stirring at scales on the order of 100 km (the mesoscale) is fairly well understood and explicitly represented in modern eddy-resolving numerical models of global ocean circulation. The same cannot be said for smaller-scale stirring processes. Here, the authors describe a major oceanographic field experiment aimed at observing and understanding the processes responsible for stirring at scales of 0.1–10 km. Stirring processes of varying intensity were studied in the Sargasso Sea eddy field approximately 250 km southeast of Cape Hatteras. Lateral variability of water-mass properties, the distribution of microscale turbulence, and the evolution of several patches of inert dye were studied with an array of shipboard, autonomous, and airborne instruments. Observations were made at two sites, characterized by weak and moderate background mesoscale straining, to contrast different regimes of lateral stirring. Analyses to date suggest that, in both cases, the lateral dispersion of natural and deliberately released tracers was O(1) m² s^-1 as found elsewhere, which is faster than might be expected from traditional shear dispersion by persistent mesoscale flow and linear internal waves. These findings point to the possible importance of kilometer-scale stirring by submesoscale eddies and nonlinear internal-wave processes or the need to modify the traditional shear-dispersion paradigm to include higher-order effects. A unique aspect of the Scalable Lateral Mixing and Coherent Turbulence (LatMix) field experiment is the combination of direct measurements of dye dispersion with the concurrent multiscale hydrographic and turbulence observations, enabling evaluation of the underlying mechanisms responsible for the observed dispersion at a new level.

The ratio of two in situ optical measurements — chlorophyll fluorescence (Chl F) and optical particulate backscattering (bbp) —3 varied with changes in phytoplankton community composition during the North Atlantic Bloom Experiment in the Iceland Basin in 2008. Using ship-based measurements of Chl F, b_bp, chlorophyll a (Chl), high-performance liquid chromatography (HPLC) pigments, phytoplankton composition and carbon biomass, we found that oscillations in the ratio varied with changes in plankton community composition; hence we refer to Chl F/b_bp as an "optical community index". The index varied by more than a factor of 2, with low values associated with pico- and nanophytoplankton and high values associated with diatom-dominated phytoplankton communities. Observed changes in the optical index were driven by taxa-specific chlorophyll-to-autotrophic carbon ratios and by physiological changes in Chl F associated with the silica limitation. A Lagrangian mixed-layer float and four Seagliders, operating continuously for 2 months, made similar measurements of the optical community index and followed the evolution and later demise of the diatom spring bloom. Temporal changes in optical community index and, by implication, the transition in community composition from diatom to post-diatom bloom communities were not simultaneous over the spatial domain surveyed by the ship, float and gliders. The ratio of simple optical properties measured from autonomous platforms, when carefully validated, provides a unique tool for studying phytoplankton patchiness on extended temporal scales and ecologically relevant spatial scales and should offer new insights into the processes regulating patchiness.

Pressure gradient measurements on a subsurface Lagrangian float are used to measure the spectrum of surface waves for 100 days of measurements at Ocean Weather Station Papa. Along Lagrangian trajectories of surface waves, the pressure is constant and the vertical pressure gradient fluctuations equal the Eulerian fluctuations at the mean float depth to second order in wave height. Measurement of the pressure difference between the top and the bottom of the float can thus be used to measure the waves. Corrections for the wave decay with depth, for the vertical motion of the float, for the finite sampling interval, and for the sampling noise (among others) are necessary to obtain accurate results. With these corrections, scalar spectra accurately match those from a nearby Waverider buoy for significant wave heights greater than about 3 m. For smaller wave heights, noise in the pressure measurements biases the float spectral measurements. Significant wave height is measured with an rms error of 0.37 m over the measured range of 1–9 m. This demonstrates that Lagrangian floats accurately follow the Lagrangian trajectories of surface waves. More detailed and quieter measurements of float motion could likely measure directional wave spectra from below the surface. Similar methods could be used to infer surface wave properties from other subsurface vehicles.

The export of particulate organic carbon (POC) from the surface ocean to depth is traditionally ascribed to sinking. Here, we show that a dynamic eddying flow field subducts surface water with high concentrations of nonsinking POC. Autonomous observations made by gliders during the North Atlantic spring bloom reveal anomalous features at depths of 100 to 350 m with elevated POC, chlorophyll, oxygen, and temperature-salinity characteristics of surface water. High-resolution modeling reveals that during the spring transition, intrusions of POC-rich surface water descend as coherent, 1 to 10 km scale filamentous features, often along the perimeter of eddies. Such a submesoscale eddy-driven flux of POC is unresolved in global carbon cycle models but can contribute as much as half of the total springtime export of POC from the highly productive subpolar oceans.

The North Atlantic subtropical salinity maximum harbors the saltiest surface waters of the open world ocean. Subduction of these waters gives rise to Subtropical Underwater, spreading the high-salinity signature over the entire basin. The Salinity Processes in the Upper-ocean Regional Study (SPURS) is aimed at understanding the physics controlling the thermohaline structure in the salinity maximum region. A combination of moored and autonomous float observations is used here to describe the vertical water mass interleaving in the area. Seasonal intensification of interleaving in late spring and the abundance of small-scale thermohaline intrusions point to an important role for submesoscale processes in the initial subduction and subsequent evolution of Subtropical Underwater.

We examine the variability of near-surface salinity in a 10° x 10° region of the eastern North Atlantic, the location of the first part of the Salinity Processes in the Upper-ocean Regional Study (SPURS-1). The data used were collected over a two-year period, largely by a group of two types of profiling floats equipped with sensors that record high-resolution temperature and salinity measurements in the upper few meters of the water column. By comparing the SPURS-1 measurements to observations in the area from previous decades, we examine variability at time scales ranging from a few hours (mostly consisting of rainfall-driven decreases in salinity) to diurnal cycles in temperature and salinity, seasonal variability and the annual cycle, and finally to decadal-scale changes. The relationship of near-surface salinity to the hydrological cycle suggests a continuous spectrum of variability in this cycle from hours to decades.

Underwater ambient sound levels beneath tropical cyclones were measured using hydrophones onboard Lagrangian floats, which were air deployed in the paths of Hurricane Gustav (2008) and Typhoons Megi (2010) and Fanapi (2010). The sound levels at 40 Hz – 50 kHz from 1- to 50-m depth were measured at wind speeds up to 45 m s^-1. The measurements reveal a complex dependence of the sound level on wind speed due to the competing effects of sound generation by breaking wind waves and sound attenuation by quiescent bubbles. Sound level increases monotonically with increasing wind speed only for low frequencies (<200 Hz). At higher frequencies (>200 Hz), sound level first increases and then decreases with increasing wind speed. There is a wind speed that produces a maximum sound level for each frequency; the wind speed of the maximum sound level decreases with frequency. Sound level at >20 kHz mostly decreases with wind speed over the wind range 15–45 m s^-1. The sound field is nearly uniform with depth in the upper 50 m with nearly all sound attenuation limited to the upper 2 m at all measured frequencies. A simple model of bubble trajectories based on the measured float trajectories finds that resonant bubbles at the high-frequency end of the observations (25 kHz) could easily be advected deeper than 2 m during tropical cyclones. Thus, bubble rise velocity alone cannot explain the lack of sound attenuation at these depths.

More than 1 billion people depend on rainfall from the South Asian monsoon for their livelihoods. Summertime monsoonal precipitation is highly variable on intraseasonal time scales, with alternating "active" and "break" periods. These intraseasonal oscillations in large-scale atmospheric convection and winds are closely tied to 1°C—2°C variations of sea surface temperature in the Bay of Bengal.

The oceanic surface mixed layer heat budget in the central equatorial Indian Ocean is calculated from observations at two mooring sites (0°S 79°E and 1.5°S 79°E) during three active and calm phases of Madden–Julian Oscillation (MJO) events between September 2011 and January 2012. At both mooring locations, the surface mixed layer is generally heated during MJO calm phases. During MJO active phases at both mooring locations, the surface mixed layer is always cooled by the net surface heat flux and also sometimes by the turbulent heat flux at the bottom of the surface mixed layer. The turbulent heat flux at the bottom of the surface mixed layer, however, varies greatly among different MJO active phases and between the two mooring locations. A barrier layer exerts control on the turbulent heat flux at the base of the surface mixed layer; we quantify this barrier layer strength by a "barrier layer potential energy," which depends on the thickness of the barrier layer, the thickness of the surface mixed layer, and the density stratification across the isothermal layer. During one observed MJO active phase, a strong turbulent heat flux into the mixed layer was diagnosed, despite the presence of a 10–20 m thick barrier layer. This was due to the strong shear across the barrier layer driven by the westerly winds, which provided sufficient available kinetic energy to erode the barrier layer. To better simulate and predict net surface heat fluxes and the MJO, models must estimate the oceanic barrier layer potential energy, background shear, stratification, and surface forcing accurately.

We present a new physically based calibration equation for Aanderaa Inc. oxygen sensing optodes. We use the two site fluorescence quenching model of Demas et al. (1995) to describe the nonlinear Stern-Volmer response of the optode foil to oxygen partial pressure. Seven (minimally six) coefficients quantify foil response to oxygen and temperature; another quantifies response to hydrostatic pressure. These eight coefficients are related, theoretically, to basic physical properties of the foil. The equation provides a framework to study causes of variability and drift in optodes and to develop better quality control and handling procedures. We tested the equation using factory calibrations of 24 optode foils. When accurate multi-point calibration data are unavailable, two additional coefficients empirically correct the usually large differences observed between factory foil calibrations and post-factory laboratory/field calibrations; we cannot eliminate this major cause of uncertainty in optode calibrations.

Excluding two potentially anomalous foils, the calibration equation fits 13 similarly calibrated foils, totaling 455 calibration points over 3 – 40°C to –0.57 ± 1.48 mbar. Analysis of the resulting best fit coefficients reveals an underlying variability in optodes associated with variability in site 2 and site 1 Stern-Volmer coefficients of 32% and 20%, respectively. The fraction of unquenched fluorophores responding with the more accessible site 1 quenching characteristics varies by only 3%. The equation fits multi-point data for two optodes within manufacturer's specifications, the greater of ± 2.5 µmol kg^-1 and ± 1.5%. Detailed measurements of calibration changes over time will be required to understand the causes of optode drift.

Nearly all operational models of upper-ocean mixing assume that the turbulence responsible for this mixing is driven by the atmospheric fluxes of momentum, heat, and moisture and the shear imposed by the ocean circulation. This idealization is supported by historical measurements of dissipation rate within the boundary layer. Detailed measurements made recently by many investigators and supported by theoretical and numerical results have found significant deviations from this classical view attributable to the influence of surface waves. Although a review of these measurements finds strong support for the influence of waves — and, in particular, for the predictions of large-eddy simulations, including the Craik-Leibovich vortex force — there are insufficient data to give definitive support to a new paradigm.

Nearly all operational ocean models use air-sea fluxes and the ocean shear and stratification to estimate upper ocean boundary layer mixing rates. This approach implicitly parameterizes surface wave effects in terms of these inputs. Here, we test this assumption using parallel experiments in a lake with small waves and in the open ocean with much bigger waves. Under the same wind stress and adjusting for buoyancy flux, we find the mixed layer average turbulent vertical kinetic energy in the open ocean typically twice that in the lake. The increase is consistent with models of Langmuir turbulence, in which the wave Stokes drift, and not wave breaking, is the dominant mechanism by which waves energize turbulence in the mixed layer. Applying these same theories globally, we find enhanced mixing and deeper mixed layers resulting from the inclusion of Langmuir turbulence in the boundary layer parameterization, especially in the Southern Ocean.

Wave and wind measurements at Ocean Weather Station P (OWS-P, 50°N 145°W) are used to evaluate the equilibrium range of surface wave energy spectra. Observations are consistent with a local balance between wind input and breaking dissipation, as described by Philips (1985). The measurements include direct covariance wind stress estimates and wave breaking dissipation rate estimates during a 3 week research cruise to OWS-P. The analysis is extended to a wider range of conditions using observations of wave energy spectra and wind speed during a 2 year mooring deployment at OWS-P. At moderate wind speeds (5–15 m/s), mooring wave spectra are in agreement, within 5% uncertainty, with the forcing implied by standard drag laws and mooring wind measurements. At high wind speeds (>15 m/s), mooring wave spectra are biased low, by 13%, relative to the forcing implied by standard drag laws and mooring wind measurements. Deviations from equilibrium are associated with directionality and variations at the swell frequencies. A spectral wave hindcast accurately reproduces the mooring observations, and is used to examine the wind input.

A detailed view of upper ocean vorticity, divergence, and strain statistics was obtained by a two-vessel survey in the North Atlantic Mode Water region in winter 2012. Synchronous Acoustic Doppler Current Profiler sampling provided the first in situ estimates of the full velocity gradient tensor at O(1 km) scale without the usual mix of spatial and temporal aliasing. The observed vorticity distribution in the mixed layer was markedly asymmetric (skewness 2.5), with sparse strands of strong cyclonic vorticity embedded in a weak, predominantly anticyclonic background. Skewness of the vorticity distribution decreased linearly with depth, disappearing completely in the pycnocline. Statistics of divergence and strain rate generally followed the normal and χ distributions, respectively. These observations confirm a high-resolution numerical model prediction for the structure of the active submesoscale turbulence field in this area.

Timely and accurate forecasts of tropical cyclones (TCs, i.e., hurricanes and typhoons) are of great importance for risk mitigation. Although in the past two decades there has been steady improvement in track prediction, improvement on intensity prediction is still highly challenging. Cooling of the upper ocean by TC-induced mixing is an important process that impacts TC intensity. Based on detail in situ air-deployed ocean and atmospheric measurement pairs collected during the Impact of Typhoons on the Ocean in the Pacific (ITOP) field campaign, we modify the widely used Sea Surface Temperature Potential Intensity (SST_PI) index by including information from the subsurface ocean temperature profile to form a new Ocean coupling Potential Intensity (OC_PI) index. Using OC_PI as a TC maximum intensity predictor and applied to a 14 year (1998–2011) western North Pacific TC archive, OC_PI reduces SST_PI-based overestimation of archived maximum intensity by more than 50% and increases the correlation of maximum intensity estimation from r²=0.08 to 0.31. For slow-moving TCs that cause the greatest cooling, r² increases to 0.56 and the root-mean square error in maximum intensity is 11 m s¹. As OC_PI can more realistically characterize the ocean contribution to TC intensity, it thus serves as an effective new index to improve estimation and prediction of TC maximum intensity.

The calibration accuracy and stability of three Aanderaa 3835 optodes and three Seabird SBE-43 oxygen sensors were evaluated over four years using in situ and laboratory calibrations. The sensors were mostly in storage, being in the ocean for typically only a few weeks per year and operated for only a few days per year. Both sensors measure partial pressure of oxygen, or equivalently saturation at standard pressure; results are expressed in this variable. It is assumed that sensor drift occurs in the oxygen sensitivity of the sensors, not the temperature compensation; this is well justified for the SBE-43 based on multiple calibrations.

Neither sensor had significant long-term drift in output when sampling anoxic water. Sensor output at 100% saturation differed from the factory calibrations by up to ±6% (averaging –2.3%±3%) for the SBE-43 and up to –12.6% for the optodes. The optode output at 100% saturation is well described by a single decaying exponential with a decay constant of ~2 yr and an amplitude of 28%. The mechanism of this drift is unknown, but is not primarily due to sensor operation. It may be different from that experienced by sensors continuously deployed in the ocean. Thus, although the optodes in this study did not have a stable calibration, their drift was stable and, once calibrated, allowed optode and SBE-43 pairs mounted on the same autonomous floats to be calibrated to an accuracy of ±0.4% over a 4-yr period.

Several tens of thousands of temperature profiles are used to investigate the thermal evolution of the cold wake of Typhoon Fanapi, 2010. Typhoon Fanapi formed a cold wake in the Western North Pacific Ocean on 18 September characterized by a mixed layer that was >2.5°C cooler than surrounding water, and extending to >80 m, twice as deep as the pre-existing mixed layer. The initial cold wake became capped after 4 days as a warm, thin surface layer formed. The thickness of the capped wake, defined as the 26°C to 27°C layer, decreased, approaching the background thickness of this layer with an e-folding time of 23 days, almost twice the e-folding lifetime of the Sea Surface Temperature (SST) cold wake (12 days). The wake was advected several hundreds of kilometers from the storm track by a pre-existing mesoscale eddy. The observations reveal new intricacies of cold wake evolution and demonstrate the challenges of describing the thermal structure of the upper ocean using sea surface information alone.

Springtime phytoplankton blooms photosynthetically fix carbon and export it from the surface ocean at globally important rates. These blooms are triggered by increased light exposure of the phytoplankton due to both seasonal light increase and the development of a near-surface vertical density gradient (stratification) that inhibits vertical mixing of the phytoplankton. Classically and in current climate models, that stratification is ascribed to a springtime warming of the sea surface. Here, using observations from the subpolar North Atlantic and a three-dimensional biophysical model, we show that the initial stratification and resulting bloom are instead caused by eddy-driven slumping of the basin-scale north-south density gradient, resulting in a patchy bloom beginning 20 to 30 days earlier than would occur by warming.

The co-variability of particulate backscattering (b_bp) and attenuation (c_p) coefficients and particulate organic carbon (POC) provides a basis for estimating POC on spatial and temporal scales that are impossible to obtain with traditional sampling and chemical analysis methods. However, the use of optical proxies for POC in the open ocean is complicated by variable relationships reported in the literature between POC and c_p or b_bp. During the 2008 North Atlantic Bloom experiment, we accrued a large data set consisting of >300 POC samples and simultaneously measured c_p and b_bp. Attention to sampling detail, use of multiple types of POC blanks, cross-calibration of optical instruments, and parallel measurements of other biogeochemical parameters facilitated distinction between natural and methodological-based variability. The POC versus c_p slope varied with plankton community composition but not depth; slopes were 11% lower for the diatom versus the recycling community. Analysis of literature POC versus c_p slopes indicates that plankton composition is responsible for a large component of that variability. The POC versus b_bp slope decreased below the pycnocline by 20%, likely due to changing particle composition associated with remineralization and fewer organic rich particles. The higher b_bp/c_p ratios below the mixed layer are also indicative of particles of lower organic density. We also observed a peculiar platform effect that resulted in ~27% higher values for downcast versus upcast b_bp measurements. Reduction in uncertainties and improvement of accuracies of POC retrieved from optical measurements is important for autonomous sampling, and requires community consensus for standard protocols for optics and POC.

Budgets of nitrate, dissolved oxygen, and particulate organic carbon (POC) were constructed from data collected on-board a Lagrangian, profiling float deployed between April 4 and May 25, 2008, as part of the North Atlantic Bloom Experiment. These measurements were used to estimate net community production (NCP) and apparent export of POC along the float trajectory. A storm resulting in deep mixing and temporary suspension of net production separated the bloom into early (April 23–27) and main (May 6–13) periods over which ~264 and ~805 mmol C m^-2 were produced, respectively. Subtraction of the total POC production from the NCP yielded maximum estimates of apparent POC export amounting to ~92 and 574 mmol C m^-2 during the early and main blooms, respectively. The bloom terminated the following day and ~282 mmol C m^-2 were lost due to net respiration (70%) and apparent export (30%). Thus, the majority of the apparent export of POC occurred continuously during the main bloom and a large respiration event occurred during bloom Termination. A comparison of the POC flux during the main bloom period with independent estimates at greater depth suggest a rapid rate of remineralization between 60 and 100 m. We suggest the high rates of remineralization in the upper layers could explain the apparent lack of carbon overconsumption (C:N>6.6) in the North Atlantic during the spring bloom.

Large-amplitude (100–200 m) nonlinear internal waves (NLIWs) were observed on the continental slope in the northern South China Sea nearly diurnally during the spring tide. The evolution of one NLIW as it propagated up the continental slope is described. The NLIW arrived at the slope as a nearly steady-state solitary depression wave. As it propagated up the slope, the wave propagation speed C decreased dramatically from 2 to 1.3 m s^-1, while the maximum along-wave current speed U_max remained constant at 2 m s^-1. As U_max exceeded C, the NLIW reached its breaking limit and formed a subsurface trapped core with closed streamlines in the coordinate frame of the propagating wave. The trapped core consisted of two counter-rotating vortices feeding a jet within the core. It was highly turbulent with 10–50-m density overturnings caused by the vortices acting on the background stratification, with an estimated turbulent kinetic energy dissipation rate of O(10^-4) W kg^-1 and an eddy diffusivity of O(10^-1) m² s^-1. The core mixed continually with the surrounding water and created a wake of mixed water, observed as an isopycnal salinity anomaly. As the trapped core formed, the NLIW became unsteady and dissipative and broke into a large primary wave and a smaller wave. Although shoaling alone can lead to wave fission, the authors hypothesize that the wave breaking and the trapped core evolution may further trigger the fission process. These processes of wave fission and dissipation continued so that the NLIW evolved from a single deep-water solitary wave as it approached the continental slope into a train of smaller waves on the Dongsha Plateau. Observed properties, including wave width, amplitude, and propagation speed, are reasonably predicted by a fully nonlinear steady-state internal wave model, with better agreement in the deeper water. The agreement of observed and modeled propagation speed is improved when a reasonable vertical profile of background current is included in the model.

Each spring, increasing sunlight and associated changes in the ocean structure trigger rapid growth of phytoplankton across most of the North Atlantic Ocean north of 30°N. The bloom, one of the largest in the world, is a major sink for atmospheric carbon dioxide and a prototype for similar blooms around the world. Models of the ocean carbon cycle, a necessary component of climate models, need to accurately reproduce the biological, chemical, and physical processes occurring during these blooms. However, a paucity of detailed observations severely limits efforts to evaluate such models.

The application of new technologies has allowed oceanographers and meteorologists to study the ocean beneath typhoons in detail. Recent studies in the western Pacific Ocean reveal new insights into the influence of the ocean on typhoon intensity.

An aggregate flux event was observed by ship and by four underwater gliders during the 2008 sub-polar North Atlantic spring bloom experiment (NAB08). At the height of the diatom bloom, aggregates were observed as spikes in measurements of both particulate backscattering coefficient (bbp) and chlorophyll a fluorescence. Optical sensors on the ship and gliders were cross-calibrated through a series of simultaneous profiles, and bbp was converted to particulate organic carbon. The aggregates sank as a discrete pulse, with an average sinking rate of ~75 m^2 d^-1; 65% of aggregate backscattering and 90% of chlorophyll fluorescence content was lost between 100 m and 900 m. Mean aggregate organic carbon flux at 100 m in mid-May was estimated at 514 mg C m^2 d^-1, consistent with independent flux estimates. The use of optical spikes observed from gliders provides unprecedented coupled vertical and temporal resolution measurements of an aggregate flux event.

The Mariana Arc of ridges and islands forms an ~1300-km-long arc of a circle, ~630 km in radius centered at 17N, 139.6E. The hypothesis that the westward-propagating internal tides originating from the arc converge in a focal region is tested by examining the dominant M2 internal tides observed with air-launched expendable bathythermographs (AXBTs) and altimetric data from multiple satellites. The altimetric and AXBT observations agree well, though they measure different aspects of the internal tidal motion. M2 internal tides radiate both westward and eastward from the Mariana Arc, with isophase lines parallel to the arc and sharing the same center. The westward-propagating M2 internal tides converge in a focal region, and diverge beyond the focus. The focusing leads to energetic M2 internal tides in the focal region. The spatially smoothed energy flux is about 6.5 kW/m, about four times the mean value at the arc; the spatially un-smoothed energy flux may reach up to 17 kW/m. The size of the focus is close to the Rayleigh estimate; it is thus a perfect focus.

The North Atlantic spring bloom is one of the main events that lead to carbon export to the deep ocean and drive oceanic uptake of CO2 from the atmosphere. Here we use a suite of physical, bio-optical and chemical measurements made during the 2008 spring bloom to optimize and compare three different models of biological carbon export. The observations are from a Lagrangian float that operated south of Iceland from early April to late June, and were calibrated with ship-based measurements. The simplest model is representative of typical NPZD models used for the North Atlantic, while the most complex model explicitly includes diatoms and the formation of fast sinking diatom aggregates and cysts under silicate limitation. We carried out a variational optimization and error analysis for the biological parameters of all three models, and compared their ability to replicate the observations. The observations were sufficient to constrain most phytoplankton-related model parameters to accuracies of better than 15%. However, the lack of zooplankton observations leads to large uncertainties in model parameters for grazing. The simulated vertical carbon flux at 100 m depth is similar between models and agrees well with available observations, but at 600 m the simulated flux is larger by a factor of 2.5 to 4.5 for the model with diatom aggregation. While none of the models can be formally rejected based on their misfit with the available observations, the model that includes export by diatom aggregation has a statistically significant better fit to the observations and more accurately represents the mechanisms and timing of carbon export based on observations not included in the optimization. Thus models that accurately simulate the upper 100 m do not necessarily accurately simulate export to deeper depths.

The ocean surface boundary layer mediates air-sea exchange. In the classical paradigm and in current climate models, its turbulence is driven by atmospheric forcing. Observations at a 1-km-wide front within the Kuroshio found the rate of energy dissipation within the boundary layer to be enhanced by 10 to 20 times, suggesting that the front not the atmospheric forcing supplied the energy for the turbulence. The data quantitatively support the hypothesis that winds aligned with the frontal velocity catalyzed a release of energy from the front to the turbulence. The resulting boundary layer is stratified, in contrast to the classically well-mixed layer. These effects will be strongest at the intense fronts found in the Kuroshio, Gulf Stream, and Antarctic Circumpolar Current, key players in the climate system.

Spring diatom blooms are important for sequestering atmospheric CO2 below the permanent thermocline in the form of particulate organic carbon (POC). We measured downward POC flux during a sub-polar North Atlantic spring bloom at 100 m using thorium-234 (234Th) disequilibria, and below 100 m using neutrally buoyant drifting sediment traps. The cruise followed a Lagrangian float, and a pronounced diatom bloom occurred in a 600 km² area around the float. Particle flux was low during the first three weeks of the bloom, between 10 and 30 mg POC m/d. Then, nearly 20 days after the bloom had started, export as diagnosed from 234Th rose to 360-620 mg POC m²/d, co-incident with silicate depletion in the surface mixed layer. Sediment traps at 600 and 750 m depth collected 160 and 150 mg POC m²/ d, with a settled volume of particles of 1000-1500 mL m²/ d. This implies that 25-43% of the 100 m POC export sank below 750 m. The sinking particles were ungrazed diatom aggregates that contained transparent exopolymer particles (TEP). We conclude that diatom blooms can lead to substantial particle export that is transferred efficiently through the mesopelagic. We also present an improved method of calibrating the Alcian Blue solution against Gum Xanthan for TEP measurements.

The sea surface temperature in the Pacific equatorial cold tongue is influenced strongly by the turbulent entrainment flux. A numerical model using a level-1.5 turbulence closure scheme suggests strong modulation of the entrainment flux by tropical instability waves (TIWs). Turbulence observations taken by a Lagrangian float encountering a TIW confirm the spatial pattern of turbulent flux variation predicted by the model.

The strongest observed turbulence mixing occurred at the leading edge of the TIW trough; turbulence diffusivity K – 10^-2 m² s^-1 and turbulent heat flux Q – 1000 W m^-2 at the base of surface mixed layer. The weakest observed turbulence occurred at –2° south of the TIW trough; K – 10^-4 m² s^-1 and Q – 10 W m^-2. The TIW caused nearly two decades of turbulence variation within an O(1000 km) zonal scale and O(100 km) meridional scale. Model results suggest that the increased entrainment heat flux at the leading edge of the TIW trough can be explained by the enhancement of shear at the surface mixed layer base modulated by the TIWs.

Although isopycnal mixing is undoubtedly important at global and gyre scales, the relative importance of isopycnal and diapycnal mixing on much smaller scales is uncertain. This issue is investigated using 35 d of data from a Lagrangian float deployed on a mid-depth isopycnal on the Oregon shelf. Measurements of temperature, salinity, and pressure maintain the float on the isopycnal; its high-frequency diapycnal deviations are used to estimate the diapycnal diffusivity using an inertial subrange method; lower-frequency deviations, including intentional profiles to the surface, are used to estimate diapycnal derivatives near the target isopycnal. Downward irradiance at 490 nm is used to calibrate chlorophyll fluorescence measurements and compute solar heating rates. Corrections for the diapycnal deviations provide a nearly continuous isopycnal time series of spice (a temperature and salinity combination nearly orthogonal to potential density) and chlorophyll.

A new formulation of the diffusion equation in isopycnal coordinates is derived and used to test the accuracy of purely diapycnal mixing balances for spice and chlorophyll. On vertical scales of about 10 m and timescales of about 2 d, isopycnal spice variations are mostly controlled by diapycnal mixing, although other processes, presumably isopycnal mixing, are sometimes important. Processes other than diapycnal mixing control isopycnal chlorophyll variations on these scales. Likely candidates include isopycnal mixing with a nearby bloom, planktonic sinking out of this bloom, or possibly local phytoplankton growth. Thus both isopycnal and diapycnal mixing can be important at these small scales.

Measurements of the air–sea fluxes of N₂ and O<sub>2 were made in winds of 15–57 m s^-1 beneath Hurricane Frances using two types of air-deployed neutrally buoyant and profiling underwater floats. Two "Lagrangian floats" measured O2 and total gas tension (GT) in pre-storm and post-storm profiles and in the actively turbulent mixed layer during the storm. A single "EM-APEX float" profiled continuously from 30 to 200 m before, during and after the storm. All floats measured temperature and salinity. N2 concentrations were computed from GT and O2 after correcting for instrumental effects. Gas fluxes were computed by three methods. First, a one-dimensional mixed layer budget diagnosed the changes in mixed layer concentrations given the pre-storm profile and a time varying mixed layer depth. This model was calibrated using temperature and salinity data. The difference between the predicted mixed layer concentrations of O2 and N2 and those measured was attributed to air–sea gas fluxes FBO and FBN. Second, the covariance flux FCO(z) = < w>O2%u2032%u3009(z) was computed, where w is the vertical motion of the water-following Lagrangian floats, O2' is a high-pass filtered O2 concentration and <>(z) is an average over covariance pairs as a function of depth. The profile FCO(z) was extrapolated to the surface to yield the surface O2 flux FCO(0). Third, a deficit of O2 was found in the upper few meters of the ocean at the height of the storm. A flux FSO, moving O2 out of the ocean, was calculated by dividing this deficit by the residence time of the water in this layer, inferred from the Lagrangian floats. The three methods gave generally consistent results. At the highest winds, gas transfer is dominated by bubbles created by surface wave breaking, injected into the ocean by large-scale turbulent eddies and dissolving near 10-m depth. This conclusion is supported by observations of fluxes into the ocean despite its supersaturation; by the molar flux ratio FBO/FBN, which is closer to that of air rather than that appropriate for Schmidt number scaling; by O2 increases at about 10-m depth along the water trajectories accompanied by a reduction in void fraction as measured by conductivity; and from the profile of FCO(z), which peaks near 10 m instead of at the surface.

At the highest winds O2 and N2 are injected into the ocean by bubbles dissolving at depth. This, plus entrainment of gas-rich water from below, supersaturates the mixed layer causing gas to flux out of the near-surface ocean. A net influx of gas results from the balance of these two competing processes. At lower speeds, the total gas fluxes, FBO, FBN and FCO(0), are out of the ocean and downgradient.</sub>

Observations of vertical velocities in deep wintertime mixed layers using neutrally buoyant floats show that the convectively driven vertical velocities, roughly 1000 m per day, greatly exceed the sinking velocities of phytoplankton, 10 m or less per day. These velocities mix plankton effectively and uniformly across the convective layer and are therefore capable of returning those that have sunk to depth back into the euphotic zone. This mechanism cycles cells through the surface layer during the winter and provides a seed population for the spring bloom. A simple model of this mechanism applied to immortal phytoplankton in the subpolar Labrador Sea predicts that the seed population in early spring will be a few percent of the fall concentration if the plankton sink more slowly than the mean rate at which the surface well-mixed layer grows over the winter. Plankton that sink faster than this will mostly sink into the abyss with only a minute fraction remaining by spring. The shallower mixed layers of mid-latitudes are predicted to be much less effective at maintaining a seed population over the winter, limiting the ability of rapidly sinking cells to survive the winter.

An array of instruments air-deployed ahead of Hurricane Frances measured the three-dimensional, time dependent response of the ocean to this strong (60 m s^-1) storm. Sea surface temperature cooled by up to 2.2°C with the greatest cooling occurring in a 50-km-wide band centered 60–85 km to the right of the track. The cooling was almost entirely due to vertical mixing, not air-sea heat fluxes. Currents of up to 1.6 m s^-1 and thermocline displacements of up to 50 m dispersed as near-inertial internal waves. The heat in excess of 26°C, decreased behind the storm due primarily to horizontal advection of heat away from the storm track, with a small contribution from mixing across the 26°C isotherm. SST cooling under the storm core (0.4°C) produced a 16% decrease in air-sea heat flux implying an approximately 5 m s^-1 reduction in peak winds

Measurements of vertical velocity by isopycnal-following, neutrally buoyant floats deployed on the Oregon shelf during the summers of 2000 and 2001 were used to characterize internal gravity waves on the shelf using measurements of vertical velocity. The average spectrum of Wentzel–Kramers–Brillouin (WKB)-scaled vertical kinetic energy has the level predicted by the Garrett–Munk model (GM79), plus a narrow M₂ tidal peak and a broad high-frequency peak extending from about 0.1N to N and rising a decade above GM79. The high-frequency peak varies in energy coherently with time across its entire bandwidth. Its energy is independent of the tidal energy. The energy in the "continuum" region between the peaks is weakly correlated with the level of the high-frequency peak energy and is independent of the tidal peak energy. The vertical velocity is not Gaussian but is highly intermittent, with a calculated kurtosis of 19. The vertical kinetic energy varies geographically. Low energy is found offshore and nearshore. The highest energy is found near a small seamount. High energy is found over the rough topography of Heceta Bank and near the shelf break. The highest energy occurs as packets of high-frequency waves, often occurring on the sharp downward phase of the M₂ internal tide and called "tidal solibores."

A few isolated waves with high energy are also found. Of the 1-h periods with the highest vertical kinetic energy, 31% are tidal solibores, 8% are isolated waves, and the remainder of the periods appear unorganized. The two most energetic tidal solibores were examined in detail. As compared with the steady, propagating, two-dimensional, inviscid, internal-wave solutions to the equations of motion with no background shear [i.e., the Dubreil–Jacotin–Long (DJL) equation], all but the most energetic observed waveforms are too narrow for their height to be solitary waves. Despite the large near-N peak in vertical kinetic energy, the M₂ internal tide contributes over 80% of the energy, ignoring near-inertial waves. The tidal solibores make a very small contribution, 0.5%, to the overall internal-wave energy.

Advances in low-power instrumentation and communications now often make energy storage the limiting factor for long-term autonomous oceanographic measurements. Recent advances in photovoltaic cells, with efficiencies now close to 30%, make solar power potentially viable even for vehicles such as floats that only surface intermittently. A simple application, the development of a solar-powered Argos recovery beacon, is described here to illustrate the technology. The 65-cm² solar array, submersible to at least 750 dbar, powers an Argos beacon. Tests indicate that with minor improvements the beacon will run indefinitely at any latitude equatorward of about 50°. Scaling up this design to current operational profiling floats, each profile could easily be powered by a few hours of solar charging, a shorter time than is currently being used for Argos data communications.

Air–sea flux measurements of O₂ and N₂ obtained during Hurricane Frances in September 2004 using air-deployed neutrally buoyant floats reveal the first evidence of a new regime of air–sea gas transfer occurring at wind speeds in excess of 35 m s^-1. In this regime, plumes of bubbles 1 mm and smaller in size are transported down from near the surface of the ocean to greater depths by vertical turbulent currents with speeds up to 20–30 cm s^-1. These bubble plumes mostly dissolve before reaching a depth of approximately 20 m as a result of hydrostatic compression. Injection of air into the ocean by this mechanism results in the invasion of gases in proportion to their tropospheric molar gas ratios, and further supersaturation of less soluble gases. A new formulation for air–sea fluxes of weakly soluble gases as a function of wind speed is proposed to extend existing formulations to span the entire natural range of wind speeds over the open ocean, which includes hurricanes.

The new formulation has separate contributions to air–sea gas flux from: 1) non-supersaturating near-surface equilibration processes, which include direct transfer associated with the air–sea interface and ventilation associated with surface wave breaking; 2) partial dissolution of bubbles smaller than 1 mm that mix into the ocean via turbulence; and 3) complete dissolution of bubbles of up to 1 mm in size via subduction of bubble plumes. The model can be simplified by combining "surface equilibration" terms that allow exchange of gases into and out of the ocean, and "gas injection" terms that only allow gas to enter the ocean. The model was tested against the Hurricane Frances data set. Although all the model parameters cannot be determined uniquely, some features are clear. The fluxes due to the surface equilibration terms, estimated both from data and from model inversions, increase rapidly at high wind speed but are still far below those predicted using the cubic parameterization of Wanninkhof and McGillis at high wind speed. The fluxes due to gas injection terms increase with wind speed even more rapidly, causing bubble injection to dominate at the highest wind speeds.

The Coupled Boundary Layer Air–Sea Transfer (CBLAST) field program, conducted from 2002 to 2004, has provided a wealth of new air–sea interaction observations in hurricanes. The wind speed range for which turbulent momentum and moisture exchange coefficients have been derived based upon direct flux measurements has been extended by 30% and 60%, respectively, from airborne observations in Hurricanes Fabian and Isabel in 2003. The drag coefficient (CD) values derived from CBLAST momentum flux measurements show CD becoming invariant with wind speed near a 23 m s^-1 threshold rather than a hurricane-force threshold near 33 m s^-1. Values above 23 m s^-1 are lower than previous open-ocean measurements.

The Dalton number estimates (CE) derived from CBLAST moisture flux measurements are shown to be invariant with wind speeds up to 30 m s^-1, which is in approximate agreement with previous measurements at lower winds. These observations imply a CE/CD ratio of approximately 0.7, suggesting that additional energy sources are necessary for hurricanes to achieve their maximum potential intensity. One such additional mechanism for augmented moisture flux in the boundary layer might be "roll vortex" or linear coherent features, observed by CBLAST 2002 measurements to have wavelengths of 0.9–1.2 km. Linear features of the same wavelength range were observed in nearly concurrent RADARSAT Synthetic Aperture Radar (SAR) imagery.

As a complement to the aircraft measurement program, arrays of drifting buoys and subsurface floats were successfully deployed ahead of Hurricanes Fabian (2003) and Frances (2004) [16 (6) and 38 (14) drifters (floats), respectively, in the two storms]. An unprecedented set of observations was obtained, providing a four-dimensional view of the ocean response to a hurricane for the first time ever. Two types of surface drifters and three types of floats provided observations of surface and sub-surface oceanic currents, temperature, salinity, gas exchange, bubble concentrations, and surface wave spectra to a depth of 200 m on a continuous basis before, during, and after storm passage, as well as surface atmospheric observations of wind speed (via acoustic hydrophone) and direction, rain rate, and pressure. Float observations in Frances (2004) indicated a deepening of the mixed layer from 40 to 120 m in approximately 8 h, with a corresponding decrease in SST in the right-rear quadrant of 3.2°C in 11 h, roughly one-third of an inertial period. Strong inertial currents with a peak amplitude of 1.5 m s^-1 were observed. Vertical structure showed that the critical Richardson number was reached sporadically during the mixed-layer deepening event, suggesting shear-induced mixing as a prominent mechanism during storm passage. Peak significant waves of 11 m were observed from the floats to complement the aircraft-measured directional wave spectra.

The development and testing of a new, fast response, profiling gas tension device (GTD) that measures total dissolved air pressure is presented. The new GTD equilibrates a sample volume of air using a newly developed (patent pending) tubular silicone polydimethylsiloxane (PDMS) membrane interface. The membrane interface is long, flexible, tubular, and is contained within a seawater-flushed hose. The membrane interface communicates pressure to a precise pressure gauge using low dead-volume stainless steel tubing. The pressure sensor and associated electronics are located remotely from the membrane interface. The new GTD has an operating depth in seawater of 0–300 m. The sensor was integrated onto an upper-ocean mixed layer, neutrally buoyant float, and used in air–sea gas exchange studies. Results of laboratory and pressure tank tests are presented to show response characteristics of the device. A significant hydrostatic response of the instrument was observed over the depth range of 0–9 m, and explained in terms of expulsion (or absorption) of dissolved air from the membrane after it is compressed (or decompressed). This undesirable feature of the device is unavoidable since a large exposed surface area of membrane is required to provide a rapid response. The minimum isothermal response time varies from (2 ± 1) min near the sea surface to (8 ± 2) min at 60-m depth. Results of field tests, performed in Puget Sound, Washington, during the summer of 2004, are reported, and include preliminary comparisons with mass-spectrometric analysis of in situ water samples analyzed for dissolved N₂ and Ar. These tests served as preparations for deployment of two floats by aircraft into the advancing path of Hurricane Frances during September 2004 in the northwest Atlantic. The sensors performed remarkably well in the field. A model of the dynamical response of the GTD to changing hydrostatic pressure that accounts for membrane compressibility effects is presented. The model is used to correct the transient response of the GTD to enable a more precise measurement of gas tension when the float was profiling in the upper-ocean mixed layer beneath the hurricane.

This study tests the ability of a neutrally buoyant float to estimate the dissipation rate of turbulent kinetic energy ε from its vertical acceleration spectrum using an inertial subrange method. A Lagrangian float was equipped with a SonTek acoustic Doppler velocimeter (ADV), which measured the vector velocity 1 m below the float's center, and a pressure sensor, which measured the float's depth. Measurements were taken in flows where estimates of ε varied from 10^-8 to 10^-3 W kg^-1. Previous observational and theoretical studies conclude that the Lagrangian acceleration spectrum is white within the inertial subrange with a level proportional to ε. The size of the Lagrangian float introduces a highly reproducible spectral attenuation at high frequencies. Estimates of the dissipation rate of turbulent kinetic energy using float measurements ε_float were obtained by fitting the observed spectra to a model spectrum that included the attenuation effect. The ADV velocity measurements were converted to a wavenumber spectrum using a variant of Taylor's hypothesis. The spectrum exhibited the expected –5/3 slope within an inertial subrange. The turbulent kinetic energy dissipation rate ε_ADV was computed from the level of this spectrum. These two independent estimates, ε_ADV and ε_float, were highly correlated. The ratio ε_float/ε_ADV deviated from one by less than a factor of 2 over the five decades of ε measured. This analysis confirms that ε can be estimated reliably from Lagrangian float acceleration spectra in turbulent flows. For the meter-sized floats used here, the size of the float and the noise level of the pressure measurements sets a lower limit of ε_float > 10^-8 W kg^-1.

The temperature of the sea surface beneath the hurricane inner core is a key factor controlling the flux of enthalpy from the ocean to the hurricane and thus an important influence on hurricane intensification. Mixing caused by the hurricane winds produces a rapid cooling of the sea surface as cooler water is mixed upward from below. This produces a front in sea surface temperature beneath the storm. The position of this front relative to the eye should thus be related to SST-induced storm intensification. Data from the CBLAST measurements in hurricanes is used to map several examples of this front. The sensitivity of its position to storm properties is explored using simple models of ocean mixing.

We analyze three sets of ADCP measurements taken on the Dongsha plateau, on the shallow continental shelf, and on the steep continental slope in the northern South China Sea (SCS). The data show strong divergences of energy and energy flux of nonlinear internal waves (NLIW) along and across waves' prevailing westward propagation path. The NLIW energy flux is 8.5 kW m^-1 on the plateau, only 0.25 kW m^-1 on the continental shelf 220 km westward along the propagation path, and only 1 kW m^-1 on the continental slope 120 km northward across the propagation path. Along the wave path on the plateau, the average energy flux divergence of NLIW is ~0.04 W m^-2, which corresponds to a dissipation rate of O(10^-7 – 10^-6) W kg^-1. Combining the present with previous observations and model results, a scenario of NLIW energy flux in the SCS emerges. NLIWs are generated east of the plateau, propagate predominantly westward across the plateau along a beam of ~100 km width that is centered at ~21°N, and dissipate nearly all their energy before reaching the continental shelf.

Observations of the three-dimensional structure and evolution of a thermohaline intrusion in a wide, deep fjord are presented. In an intensive two-ship study centered on an acoustically tracked neutrally buoyant float, a cold, fresh, low-oxygen tongue of water moving southward at about 0.03 m s^-1 out of Possession Sound, Washington, was observed. The feature lay across isopycnal surfaces in a 50–80-m depth range. The large-scale structures of temperature, salinity, velocity, dissolved oxygen, and chlorophyll were mapped with a towed, depth-cycling instrument from one ship while the other ship measured turbulence close to the float with loosely tethered microstructure profilers. Observations from both ships were expressed in a float-relative (Lagrangian) reference frame, minimizing advection effects. A float deployed at the tongue's leading edge warmed 0.2°C in 24 h, which the authors argue resulted from mixing. Diapycnal heat fluxes inferred from microstructure were 1–2 orders of magnitude too small to account for the observed warming. Instead, lateral stirring along isopycnals appears responsible, implying isopycnal diffusivities O(1 m² s^-1). These are consistent with estimates, using measured temperature microstructure, from an extension of the Osborn–Cox model that allows for lateral gradients. Horizontal structures with scales O(100 m) are seen in time series and spatial maps, supporting this interpretation.

Four sets of ADCP measurements were taken in the South China Sea (SCS); these results were combined with previous satellite observations and internal-tide numerical model results. Analysis suggests that strong internal tides are generated in Luzon Strait, propagate as a narrow tidal beam into the SCS, are amplified by the shoaling continental slope near TungSha Island, become nonlinear, and evolve into high-frequency nonlinear internal waves (NIW). Internal waves in the SCS have geographically distinct characteristics. (1) West of Luzon Strait the total internal wave energy (E_iw ) is 10 x that predicted by Garrett-Munk spectra (E_GM) (Levine, 2002). There is no sign of NIW. (2) Near TungSha Island E_iw = 13 x E_GM. Strong nonlinear and high-harmonic tides are present. Repetitive trains of large-amplitude NIW appear primarily at a semidiurnal periodicity with their amplitudes modulated at a fortnightly tidal cycle. The rms vertical velocity of NIW shows a clear spring-neap tidal cycle and is linearly proportional to the barotropic tidal height in Luzon Strait with a 1.85-day time lag, consistent with the travel time of internal tides from Luzon Strait to TungSha Island. (3) At the northern SCS shelfbreak E_iw = 4 x E_GM. Single depression waves are found, but no multiple-waves packets are evident. (4) On the continental shelf E_iw = 2 x E_GM . Both depression and elevation NIW exist.

We performed a series of laboratory experiments on the interactions between turbulent wave boundary layers and a predominantly silt-sized sediment bed. Under a wide range of wave conditions similar to those observed on storm-dominated midshelf environments we produced quasi-steady high-density benthic suspensions. These suspensions were turbulent, while containing large near-bed concentrations of suspended sediment (17–80 g/L), and were separated from the upper water column by a lutocline. Detailed measurements of the vertical structure of velocity, turbulence, and sediment concentration revealed that the wave boundary layer, while typically >1 cm thick in sediment-free conditions, was reduced substantially in size, often to <3 mm, with the addition of suspendible sediment. This likely resulted from sediment-induced stratification that limited vertical mixing of momentum. Despite boundary layer reduction the flows were able to support high-density suspensions as thick as 8 cm because turbulent energy was transported upward from this thin but highly energetic near-bed region. Standard formulations of the Richardson number for shear flows are not applicable to our experiments since the suspensions were supported from transported rather than locally produced turbulence.

Neutrally buoyant, isopycnal-following floats were deployed on the Oregon continental shelf during the upwelling seasons of 2000 and 2001 and were carried southward by the mean current. The floats made CTD profiles and obtained GPS fixes twice daily, thus providing a hydrographic section along a known track. The floats followed the water accurately while at depth, but were displaced from the trajectories of the deep water during semidiurnal surfacings. These effects were large for water depths shallower than 100 m, but small on the rest of the shelf. Float trajectories, corrected for advection while on the surface, showed significant error when near the shore, but little net effect offshore. Some floats moved onshore and upward along the sloping isopycnals as expected during upwelling. Although the position of the isopycnal could be predicted accurately from the wind, the motion along the isopycnal showed significant fluctuations unrelated to the wind. These may be due to barotropic shelf waves. Some floats moved southward, roughly following the isobaths around Heceta Bank to Cape Blanco. Here they underwent large vertical and cross-shelf excursions and eventually moved offshore. Two floats passed through this region 25 days apart following different trajectories, indicating an unsteady flow. Overall, these data show the expected mix of a classical upwelling circulation in the north, an offshore jet with eddies in the south, and a strong influence of topography on both the mean flow and its fluctuations.

The ability of neutrally buoyant, high-drag floats to measure the air–sea heat flux from within the turbulent oceanic boundary layer is investigated using float data from four different winter and fall float deployments. Two flux estimates can be made: Q_0A measures the vertical advection of heat, and Q_0D integrates the Lagrangian heating rate. Because the floats are only imperfectly Lagrangian, a key issue is diagnosing the ability of a given set of float data to make accurate flux measurements. A variety of diagnostics are explored and evaluated. Here Q_0A and Q_0D are compared to heat flux measurements computed using bulk formulas and shipboard measurements for one 2-week cruise. Quality controlled float-based fluxes agree with bulk fluxes to within 10 W m^-2 for both positive and negative values. The differences are well within the expected statistical errors in the float measurements and the bias errors of the bulk measurements.

The Lagrangian properties of a high-resolution, three-dimensional, direct numerical simulation of Kelvin–Helmholtz (K–H) instability are examined with the goal of assessing the ability of Lagrangian measurements to determine rates and properties of ocean mixing events. The size and rotation rates of the two-dimensional K–H vortices are easily determined even by individual trajectories. Changes in density along individual trajectories unambiguously show diapycnal mixing. These changes are highly structured during the early phases of the instability but become more random once the flow becomes turbulent. Only 36 particles were tracked, which is not enough to usefully estimate volume-averaged fluxes from the average rates of temperature change. Similarly, time- and volume-averaged vertical advective flux can be estimated to only 20% accuracy. Despite the relatively low Reynolds number of the flow, the dissipation rates of energy and density variance are correlated with the spectral levels of transverse velocity and density in an inertial subrange, as expected for high-Reynolds-number turbulence. The Kolmogorov constants are consistent with previous studies. This suggests that these inertial dissipation methods are the most promising techniques for making useful measurements of diapycnal mixing rates from practical Lagrangian floats because they converge rapidly and have a clear theoretical basis.

Intensive data collection in the region of the Labrador Sea northwest of former Ocean Weather Station Bravo during the winter of 1998 allowed examination of the meso- and submesoscale structure during active convection. Data used include shipboard CTDs, shipboard underway data, isobaric CTD profiling floats, and high-drag floats whose trajectories were approximately Lagrangian in the horizontal and vertical directions. On the mesoscale, O(20 km), horizontal variability was nearly 1°C and 0.1 psu. An anticyclonic eddy of 40-km diameter was found. On a smaller scale, O(5 km), variability of 0.04 psu and 0.3°C was found. By utilizing data from fully Lagrangian floats, this smaller-scale field was found to be organized into eddies of 1–12-km radius. Both cyclonic and anticyclonic features were found, with the anticyclones being larger. This observation may explain the excess of anticyclones reported in previous studies having lower spatial resolution. These features were unsteady, with an anticyclone doubling in size in less than a week. There was communication between eddies, with four of five floats escaping an anticyclone. This exchange produced horizontal diffusivities (250–350 m² s^-1) on the order of basin-scale values, implying these small-scale features could produce the majority of the stirring. The influence of these structures on convection was explored: convection occurred throughout the region sampled despite the presence of eddies, the deepest mixed layers were found within an anticyclone, and convective trajectories within small cyclones were found to be significantly tilted so as to avoid the surface centers of the cyclones.

This work describes several techniques to process data collected in the central Labrador Sea during the winters of 1997 and 1998 as part of the Labrador Sea Deep Convection Experiment. Ship-based observations (CTD and intake logs) and float data (profiling isobaric floats and fully Lagrangian floats) are intercalibrated and used to estimate trends in mixed layer properties during the winter of 1998. RAFOS records are used to calculate the horizontal position of fully Lagrangian floats utilizing two methods.

This paper is an observational study of small-scale coherent eddies in the Labrador Sea, a region of dense water formation thought to be of considerable importance to the North Atlantic overturning circulation. Numerical studies of deep convection emphasize coherent eddies as a mechanism for the lateral transport of heat, yet their small size has hindered observational progress. A large part of this paper is therefore devoted to developing new methods for identifying and describing coherent eddies in two observational platforms, current meter moorings and satellite altimetry. Details of the current and water mass structure of individual eddy events, as they are swept past by an advecting flow, can then be extracted from the mooring data. A transition is seen during mid-1997, with long-lived boundary current eddies dominating the central Labrador Sea year-round after this time, and convectively formed eddies similar to those seen in deep convection modeling studies apparent prior to this time. The TOPEX / Poseidon altimeter covers the Labrador Sea with a loose "net" of observations, through which coherent eddies can seem to appear and disappear. By concentrating on locating and describing anomalous events in individual altimeter tracks, a portrait of the spatial and temporal variability of the underlying eddy field can be constructed. The altimeter results reveal an annual "pulsation" of energy and of coherent eddies originating during the late fall at a particular location in the boundary current, pinpointing the time and place of the boundary current-type eddy formation. The interannual variability seen at the mooring is reproduced, but the mooring site is found to be within a localized region of greatly enhanced eddy activity. Notably lacking in both the annual cycle and interannual variability is a clear relationship between the eddies or eddy energy and the intensity of wintertime cooling. These eddy observations, as well as hydrographic evidence, suggest an active role for boundary current dynamics in shaping the energetics and water mass properties of the interior region.

Between 1996 and 1998, a concerted effort was made to study the deep open ocean convection in the Labrador Sea. Both in situ observations and numerical models were employed with close collaboration between the researchers in the fields of physical oceanography, boundary layer meteorology, and climate. A multitude of different methods were used to observe the state of ocean and atmosphere and determine the exchange between them over the experiment's period. The Labrador Sea Deep Convection Experiment data collection aims to assemble the observational data sets in order to facilitate the exchange and collaboration between the various projects and new projects for an overall synthesis. A common file format and a browsable inventory have been used so as to simplify the access to the data.

A truly Lagrangian float would follow all three components of oceanic velocity on all timescales. Progress toward this goal is reviewed by analyzing the performance of nearly Lagrangian floats deployed in a variety of oceanic flows. Two new float types, described in this paper, are autonomous with durations of months, can alternate between Lagrangian and profiling modes, relay data via satellite, and can carry a variety of sensors. A novel hull design is light, strong, and has a compressibility close to that of seawater.

The key to making floats accurately Lagrangian is an improved understanding of the factors that control float buoyancy and motion. Several insights are presented here. Anodized aluminum gains weight in seawater due to reactions between its surface and seawater. At low pressure the buoyancy of floats with O-ring seals varies as if attached bubbles of air were being compressed. The volume of "air" decays exponentially with a decay scale of a few days from 10 to 30 cc at deployment to an asymptotic value that depends on pressure. The drag of floats moving slowly through a stratified ocean is dominated by internal wave generation and is thus linear, not quadratic. Internal wave drag acting on an isopycnal-seeking float will cause the float to be Lagrangian for frequencies greater than about N/30, where N is the buoyancy frequency.

These floats have proven most useful in measuring the turbulence in ocean boundary layers and other regions of strong turbulence where the ability of the floats to be Lagrangian on short timescales matches the short timescale of the processes and where the size of the turbulent eddies exceeds the size of the float. On longer timescales, the floats successfully operate as isopycnal followers. Because truly Lagrangian floats are highly sensitive to minor perturbations, extension of the frequency band over which the floats are Lagrangian will require careful control of float buoyancy and thus a detailed understanding of the float's equation of state.

Three neutrally buoyant floats were air deployed ahead of Hurricane Dennis on 28 August 1999. These floats were designed to accurately follow three-dimensional water trajectories and measure pressure (i.e., their own depth) and temperature. The hurricane eye passed between two of the floats; both measured the properties of the ocean boundary layer beneath sustained 30 m s^-1 winds. The floats repeatedly moved through a mixed layer 30–70 m deep at average vertical speeds of 0.03–0.06 m s^-1. The speed was roughly proportional to the friction velocity. Mixed layer temperature cooled about 2.8° and 0.75°C at the floats on the east and west sides of the northward-going storm, respectively. Much of the cooling occurred before the eye passage. The remaining terms in the horizontally averaged mixed layer heat budget, the vertical velocity—temperature covariance and the Lagrangian heating rate, were computed from the float data. Surface heat fluxes accounted for only a small part of the cooling. Most of the cooling was due to entrainment of colder water from below and, on the right-hand (east) side only, horizontal advection and mixing with colder water. The larger entrainment flux on this side of the hurricane was presumably due to the much larger inertial currents and shear. Although these floats can make detailed measurements of the heat transfer mechanisms in the ocean boundary layer under these severe conditions, accurate measurements of heat flux will require clusters of many floats to reduce the statistical error.

The inertial subrange Kolmogorov constant for the Lagrangian velocity structure function C₀ is related to the inertial subrange constant for the Lagrangian acceleration spectrum β by C₀ = πβ. However, R_λ must be greater than about 10⁵ for the inertial subrange of the structure function to be sufficiently wide to accurately determine C₀, while values of R_λ greater than 10² are sufficient to determine π. Taking these R_λ limitations into account, the only two known high-quality independent measurements of C₀ are 5.5 and 6.4.

In the shear stratified flow below the surface mixed layer in the central equatorial Pacific, energetic near-N (buoyancy frequency) internal waves and turbulence mixing were observed by the combination of a Lagrangian neutrally buoyant float and Eulerian mooring sensors. The turbulence kinetic energy dissipation rate ε and the thermal variance diffusion rate χ were inferred from Lagrangian frequency spectral levels of vertical acceleration and thermal change rate, respectively, in the turbulence inertial subrange. Variables exhibiting a nighttime enhancement include the vertical velocity variance (dominated by near-N waves), ε, and χ. Observed high levels of turbulence mixing in this low-Ri (Richardson number) layer, the so-called deep-cycle layer, are consistent with previous microstructure measurements. The Lagrangian float encountered a shear instability event. Near-N waves grew exponentially with a 1-h timescale followed by enhanced turbulence kinetic energy and strong dissipation rate. The event supports the scenario that in the deep-cycle layer shear instability may induce growing internal waves that break into turbulence. Superimposed on few large shear-instability events were background westward-propagating near-N waves. The floats' ability to monitor turbulence mixing and internal waves was demonstrated by comparison with previous microstructure measurements and with Eulerian measurements.

We characterize and quantify the transport of heat (Boussinesq density) in a highly idealized entraining convective mixed layer based on simulations of Lagrangian measurements in a two-dimensional model. The primary objectives are to assess and explore the merits and difficulties in estimating the heat budget from perfect and imperfect Lagrangian floats. A significant advantage of Lagrangian measurements is that the time derivative of temperature along these trajectories gives a direct measure of the diffusive heat flux. Using simulated perfect Lagrangian floats, estimates of the surface buoyancy flux, the depth of the mixed layer, vertical profiles of advective and diffusive heat flux, and the overall rate of cooling are shown to agree accurately with the known results extracted from the Eulerian simulations. The Lagrangian nature of the data is exploited to reveal the structure of the flow within the convective layer and to quantify the heat fluxes associated with the different types of eddies.

Phase plots of Lagrangian trajectories in density-depth space reveal three distinct classes of motions: (1) plumes, which develop in the cold, heavy near-surface thermal boundary layer and plunge into the mixed layer interior carrying heavy water downward; (2) interior turbulence, comprising random motions between the base of the thermal boundary layer and the base of the surface mixed layer; and (3) entrainment of interior water into plumes below the thermal boundary layer, i.e., a transition from class 2 to class 1. Plumes dominate the heat transport. Simulations were also made using slightly buoyant floats; these are not perfectly Lagrangian. Buoyancy concentrates the floats near the surface resulting in an oversampling of the stronger plumes. Making the same heat budget calculations as with the perfect floats results in a nonzero estimated Lagrangian heating rate in the interior and a curved profile of vertical heat flux that is up to 3 times too large. The local time rate change of density is not significantly affected. A correction of the heat transport for oversampling of the plumes removes most of the error. This technique allows the correct heat budget to be measured for this flow using weakly buoyant floats.

During the winters of 1997 and 1998, a total of 24 Lagrangian floats were deployed in the Labrador Sea. These floats were designed to match the buoyancy and compressibility of seawater. They measured temperature and three-dimensional position (pressure for vertical position and RAFOS acoustic tracking for latitude and longitude) as they followed water motions three-dimensionally. This data provides direct observation of mixed layer depth and excellent estimates of vertical velocity. Floats were repeatedly carried across the convecting layer by vertical velocities averaging several centimeters per second with vertical excursions of up to one kilometer. In the horizontal, several scales of eddy motion were resolved, as was a possible float predilection toward remaining in water preconditioned for convection. Heat flux estimates from this data reveal entrainment and surface heat fluxes similar in magnitude. The mixed layer acts as a vertical conveyor belt of temperature, transporting heat from depth to the surface without requiring a net change in mixed layer temperature, since incorporation of salt from below allows an increase in density without a net change in temperature. Comparison with NCEP reanalysis meteorological heat flux and wind magnitude data shows that the vertical velocity variance can be modeled with 80% skill as a linear function of lagged buoyancy flux (with the atmosphere leading the ocean by ~1/2 day) without using the wind estimates. Mixed layer motions are clearly driven by the surface buoyancy flux, B_o. A nonrotating scaling of vertical velocity variance, (B_oH)^1/3, provides a marginally better fit than a rotating scaling, (B_o/f)^1/2. Horizontal effects appear to play only a weak role during strong convection but result in rapid restratification when convective forcing weakens.

Measurements of deep convection from fully Lagrangian floats deployed in the Labrador Sea during February and March 1997 are compared with results from model drifters embedded in a large eddy simulation (LES) of the rapidly deepening mixed layer. The deep Lagrangian floats (DLFs) have a large vertical drag, and are designed to nearly match the density and compressibility of seawater. The high-resolution numerical simulation of deep convective turbulence uses initial conditions and surface forcing obtained from in situ oceanic and atmospheric observations made by the R/V Knorr. The response of model floats to the resolved large eddy fields of buoyancy and velocity is simulated for floats that are 5 g too buoyant, as well as for floats that are correctly ballasted. Mean profiles of potential temperature, Lagrangian rates of heating and acceleration, vertical turbulent kinetic energy (TKE), vertical heat flux, potential temperature variance, and float probability distribution functions (PDFs) are compared for actual and model floats.

Horizontally homogeneous convection, as represented by the LES model, accounts for most of the first and second order statistics from float observations, except that observed temperature variance is several times larger than model variance. There are no correspondingly large differences in vertical TKE, heat flux, or mixed layer depth. The augmented temperature variance may be due to mixing across large-scale temperature and salinity gradients that are largely compensated in buoyancy. The rest of the DLF statistics agree well with the response of correctly ballasted model floats in the lowest 75% of the mixed layer, and are less consistent with results from buoyantly ballasted model floats.

Other differences between observation and simulation in the mean profiles of heat flux, vertical TKE, and Lagrangian heating and vertical acceleration rates are confined to the upper quarter of the mixed layer. These differences are small contributions to layer-averaged quantities, but represent statistically significant profile features. Larger observed values of heat flux and vertical TKE in the upper quarter of the mixed layer are more consistent with model floats ballasted light. Float buoyancy, however, cannot fully account for the observed PDFs, temperature profiles, and Lagrangian rates of heating and acceleration. A test of Lagrangian self-consistency comparing vertical TKE and Lagrangian acceleration also shows that DLF measurements are not significantly affected by excess float buoyancy. These upper mixed layer features may instead be due to the interaction of wind-driven currents and baroclinicity.

Current models of oil spills include no vertical physics. They neglect the effect of vertical water motions on the transport and concentration of floating oil. Some simple ways to introduce vertical physics are suggested here. The major suggestion is to routinely measure the density stratification of the upper ocean during oil spills in order to develop a database on the effect of stratification.

Mixing in a stratified ocean is controlled by different physics, depending on the large-scale Richardson number. At high Richardson numbers, mixing is controlled by interactions between internal wave modes. At Richardson numbers of order 1, mixing is controlled by instabilities of the large-scale wave modes. A "wave–turbulence (W–T) transition separates these two regimes. This paper investigates the W–T transition, using observed oceanic and atmospheric spectra and parameterizations. Viewed in terms of Lagrangian (intrinsic) frequency spectra, the transition occurs when the inertial subrange of turbulence, confined to frequencies greater than the buoyancy frequency N, reaches the level of the internal waves, confined to frequencies less than N. Viewed in terms of vertical wavenumber spectra, the W–T transition occurs when the bandwidth of internal waves becomes small. Both of these singularities occur when the typical internal wave velocity becomes comparable to the phase speed of the lowest internal wave mode. At energies below that of the W–T transition, the dissipation rate varies as the energy squared; above the transition the dependence is linear. The transition occurs at lower shear and dissipation rates where the phase speed of the lowest mode is smaller, that is, in shallower water for the same stratification. Traditional turbulence closure models, which ignore internal waves, can be accurate only at energies above the W–T transition.

Stratified flows are often a mixture of waves and turbulence. Here, Lagrangian frequency is used to distinguish these two types of motion.

A set of 52 Lagrangian float trajectories from Knight Inlet and 10 trajectories from below the mixed layer in the wintertime northeast Pacific were analyzed using frequency spectra. A subset of 28 trajectories transit the Knight Inlet sill where energetic internal waves and strong turbulent mixing coexist.

Vertical velocity spectra show a progression from a nearly Garrett–Munk internal wave spectrum at low energies to a shape characteristic of homogeneous turbulence at high energies. All spectra show a break in slope at a frequency close to the buoyancy frequency N. Spectra from the Knight Inlet sill are analyzed in more detail. For "subbuoyant" frequencies (less than N) all 28 spectra exhibit a ratio of vertical-to-horizontal kinetic energy that varies with frequency as predicted by the linear internal wave equations. All spectra have a shape similar to that of the Garrett–Munk internal wave spectrum at subbuoyant frequencies. These motions are much more like waves than turbulence. For "superbuoyant" frequencies (greater than N) all 28 spectra are isotropic and exhibit the –2 spectral slope of inertial subrange homogeneous turbulence. These motions appear to be turbulent.

These data suggest that stratified flows may be modeled as the sum of nearly isotropic turbulence with superbuoyant Lagrangian frequencies and anisotropic internal waves with subbuoyant Lagrangian frequencies. The horizontal velocities are larger than the vertical velocities for the internal wave component but approximately equal for the turbulent component. Vertical kinetic energy is therefore a better indicator of turbulent kinetic energy than is horizontal or total kinetic energy.